Need help?Do you have a question about the Yamaha QY100 and is the answer not in the manual?
General| Type | Music Sequencer |
|---|---|
| Polyphony | 32 notes |
| Sequencer | Yes |
| Tone Generator | AWM2 |
| MIDI Channels | 16 |
| Tracks | 16 |
| Songs | 20 songs |
| Effects | Reverb, Chorus, Variation |
| Display | LCD |
| Storage | SmartMedia card |
| Power Supply | 6 x AA batteries or AC adapter |
| Connectors | MIDI In/Out, Headphone |
Essential safety guidelines to prevent injury, fire, or damage.
Explains using AC adapters and batteries for power.
Step-by-step guide for inserting and replacing batteries.
Overview of the rear and side panel connectors for various inputs/outputs.
Explains MIDI and computer connectivity options.
Instructions for connecting headphones or external sound systems.
Explains the functions of the main buttons and displays on the front panel.
Details on sequencer transport buttons and the micro keyboard.
Explains the volume, gain, and card interface controls.
Explains the role of sequencer and accompaniment tracks in composition.
Describes the GM and XG compatibility and voice capabilities.
Overview of the built-in effects, controller options, and amp simulator.
Steps for connecting a guitar and setting the input gain.
Detailed guide on adjusting preamp, chorus, and reverb parameters.
Steps for connecting a microphone and setting the input gain.
Detailed guide on adjusting delay, chorus, and reverb parameters for vocals.
Steps for recording pattern changes within a song.
Details on Realtime Replace and Overdub recording modes.
How to record pattern and tempo variations during playback.
Step-by-step instructions for inputting chord data using the micro-keyboard.
How to select and assign voices to sequencer tracks.
Explains how to record parts onto tracks using realtime input.
How to choose the Pattern (Pt) or Chord (Cd) tracks for step recording.
How to activate the specific Step Record mode for precise input.
Detailed explanation of entering pattern data in step mode.
Detailed explanation of entering chord data in step mode.
How to choose which sequencer track to record onto.
Steps to engage the Step Record mode for detailed input.
How to configure note length, velocity, and gate time for step recording.
How to assign voices and adjust mixer settings for pattern tracks.
How to assemble phrases into patterns using the Pattern Mode.
Explains how to control effect sends for each track in the VOICE mode.
How to assign phrases to specific pattern tracks.
How to access and use the VOICE EDIT mode for sound modification.
Methods for creating custom phrases using realtime and step recording.
How to use Swing and Drum Table remapping to alter playback.
Explanation of the elements displayed during SONG mode playback.
How to choose songs for playback and initiate playback.
Explains velocity indication and track muting/soloing functions.
How to access and apply Swing and Drum Table remapping.
Explanation of the mixer interface for song tracks.
How to mute or solo individual tracks within the song voice mixer.
How to adjust stereo panning and track volume levels for mixing.
Solutions for common problems like no sound or distorted audio.
List and explanation of various error messages the QY100 might display.
To Next Page
