Yamaha R S300 User Manual (English)

Other manuals for Yamaha R S300

Service Manual76 pages

Manuel D'Utilisation8 pages

Questions and Answers:

M
Michael HarveyAug 26, 2025
What to do if Yamaha Receiver sound suddenly goes off?
- P
  petersonmaryAug 26, 2025
  If the sound from your Yamaha Receiver suddenly goes off, ensure the IMPEDANCE SELECTOR switch is set to the correct position. Also, check that the openings on the top panel are not blocked, as the unit may be overheating. Finally, adjust the automatic power down setting (“APD TIMER” in the Advanced Setup menu) to a longer setting, or disable the automatic power down function by setting the POWER MANAGEMENT switch on the rear panel to OFF.
M
mcgeedanielAug 27, 2025
Why is there no sound coming from my Yamaha Receiver?
- J
  Joseph PhillipsAug 27, 2025
  Check your input and output cable connections to ensure they are properly connected and not defective. Make sure you've selected the correct input source using the INPUT selector on the front panel or the remote control. Verify that the SPEAKERS A/B switches are correctly set. Also, ensure speaker connections are secure and that the mute function is turned off. Finally, check that the MaxVol or IniVol settings are not set too low, and confirm that the component corresponding to the selected input source is turned on and playing.
J
Jorge SantanaAug 27, 2025
Why is the Yamaha Receiver remote control not working?
- K
  Kelsey DixonAug 27, 2025
  Ensure you are within the remote control's functional range of 6 m (20 ft) and within 30 degrees off-axis from the front panel. Reposition the unit if direct sunlight or lighting is interfering with the remote control sensor. If the batteries are weak, replace them.
K
Kelsey ChambersAug 27, 2025
Why is there no sound coming from my Yamaha Tuner?
- R
  robertgallowayAug 27, 2025
  If there's no sound from your Yamaha Tuner, check the input and output cable connections to ensure they are properly connected. Also, verify that you've selected the correct input source using the INPUT selector on the front panel or the remote control. Make sure the SPEAKERS A/B switches are correctly set and the speaker connections are secure. Additionally, ensure the output isn't muted and the volume settings (MaxVol or IniVol) aren't too low. Finally, confirm that the component connected to the selected input source is turned on and playing.
A
Allison ThomasAug 28, 2025
How to fix noisy FM stereo reception on Yamaha Receiver?
- H
  hancockkennethAug 28, 2025
  If FM stereo reception is noisy on your Yamaha Receiver, check the antenna connections and try using a high-quality directional FM antenna. Adjust the antenna position to minimize multipath interference.
R
richardjacksonAug 29, 2025
How to fix Connect error on Yamaha Receiver?
- J
  John HunterAug 29, 2025
  If you see a "Connect error" on your Yamaha Receiver, turn off the unit and reconnect the Universal Dock for iPod to the DOCK jack. If the problem persists, remove your iPhone/iPod from the Universal Dock for iPod and then place it back in the dock.
M
Michael PachecoAug 29, 2025
What to do if my Yamaha Receiver fails to turn on?
- R
  Robert McdonaldAug 29, 2025
  First, ensure the power cable is firmly connected. If that doesn't work, check that the impedance setting matches your speakers. Also, inspect the speaker wires to ensure they are not touching each other, as this can activate the protection circuitry. If the IMPEDANCE SELECTOR switch on the rear panel is not set correctly, set it to either end while the unit is off. Finally, if the unit has been exposed to a strong electric shock, turn it off, disconnect the power cable for 30 seconds, and then plug it back in.
D
David HardingAug 30, 2025
What to do if only one speaker can be heard on my Yamaha Receiver?
- K
  Kristi JimenezAug 30, 2025
  First, check the cable connections to ensure they are properly connected and not defective. If the problem persists, verify that the BALANCE control is set to the appropriate position.
A
Andrea HenryAug 31, 2025
What to do if the sound level is low on my Yamaha Receiver?
- K
  Kara ReynoldsAug 31, 2025
  If the loudness control function is operating, turn down the volume, set the LOUDNESS control to the FLAT position, and then adjust the volume again.
C
cliffordhartAug 31, 2025
Why is my Yamaha Receiver making a humming sound?
- A
  Angela CastilloAug 31, 2025
  If you hear a humming sound from your Yamaha Receiver, ensure the audio plugs are firmly connected and that the cables are not defective. If you are using a turntable, make the GND connection between the turntable and the unit.

Yamaha R S300 Specifications

General

Impedance	8 Ω
Receiver type	-
Frequency range	10 - 100000 Hz
RMS rated power	100 W
Maximum input power	25 W
Audio output channels	- channels
Signal-to-Noise Ratio (SNR)	100 dB
Total Harmonic Distortion (THD)	0.04 %
Power output per channel (20-20KHz@8 Ohm)	50 W
Connectivity technology	Wired
Line-in	Yes
AirPlay	No
Product color	Silver
Apple docking compatibility	Not supported
Power consumption (standby)	0.5 W
Supported radio bands	FM