reface CS / reface DX / reface CP / reface YC V1.30 Updater Guide
1
EN
Thank you for choosing a reface series product.
This Updater Guide describes how to update your reface CS / reface DX / reface CP / reface
YC to version 1.30 and the update’s main enhancements.
Please read this document carefully before updating your reface.
Notes
• This updater is designed for use with the reface CS / reface DX / reface CP / reface YC only.
• When the reface CP or reface YC is updated, all settings including keyboard settings are returned to their factory defaults.
• This updater is to be used at the user’s own risk.
• A computer running one of the following operating systems is required for this update:
Microsoft Windows 7 (32-bit or 64-bit); Windows 8.1 (32-bit or 64-bit); Windows 10 (32-bit or 64-bit)
or
Mac OSX 10.9; Mac OSX 10.10; Mac OSX 10.11
• The update will take approximately five minutes. Please ensure that your computer does not enter Sleep mode during this
time.
• During the update, do not launch or operate any applications other than the updater on your computer.
• During the update, be sure to power the reface by using its AC adaptor.
• If your reface should fail to function as a result of the supply of power being interrupted or incorrect operation during the
update, repeating the update procedure from the beginning may not resolve the problem.
• If your reface fails to function after repeating the update procedure from the beginning, please contact your nearest
Yamaha service center.
Applicable models
reface CS / reface DX / reface CP / reface YC, ealier than version 1.30
V1.30 Updater Guide
To Next Page
Need help?
General
