To Next PageTo Next Page
Need help?Do you have a question about the Yamaha REV100 and is the answer not in the manual?
General| Display | 3-digit LED |
|---|---|
| Frequency Response | 20 Hz - 20 kHz |
| Output Impedance | 1 kOhms |
| A/D Conversion | 16-bit |
| D/A Conversion | 16-bit |
| Sampling Frequency | 31.25 kHz |
| Effects | Reverb, Delay |
| Inputs | 2 x 1/4" TS (unbalanced) |
| Outputs | 2 x 1/4" TS (unbalanced) |
| MIDI | In, Out |
| Power Supply | AC adapter (included) |
| THD | Less than 0.1% |
Guidance on selecting a suitable environment, avoiding high temperatures, humidity, dust, vibration, and electromagnetic fields.
Emphasizes the need for careful handling to prevent damage from strong physical impacts.
Warns against user service and tampering, stating it voids the warranty and requires qualified personnel.
Instructs to turn off the power before connecting or disconnecting cables to prevent equipment damage.
Advises gripping connectors, not the cords, when plugging/unplugging cables.
Recommends cleaning the unit with a soft, dry cloth and avoiding solvents.
Stresses using only the supplied Yamaha AC adapter to avoid serious damage.
Details the function of each control and indicator on the REV100's front panel.
Explains the purpose of each connector located on the rear panel of the unit.
Provides instructions for physically installing the REV100 and connecting the power supply.
Guides users on how to select and cycle through the available effect programs.
Instructions on adjusting effect parameters like delay, decay, and level using rotary controls.
Procedure for saving any modifications made to the effect programs.
Steps to reset all programs to their original factory default settings.
Details the correspondence between MIDI program numbers and REV100 internal programs.
Explains how to customize the mapping of MIDI program changes to REV100 programs.
Procedure to change the MIDI channel the REV100 listens to, including OMNI mode.
Information on controlling parameters in real-time using MIDI Control Change messages.
Explains the structure of MIDI messages for program and parameter changes.
Lists electrical characteristics, input/output details, and AD/DA conversion specifications.
Provides the weight and physical measurements (width, height, depth) of the REV100 unit.
