Do you have a question about the Yamaha RX-830 and is the answer not in the manual?
Tuning Range | FM, MW |
---|---|
Total Harmonic Distortion (THD) | 0.015% |
Input Sensitivity | 150mV (line) |
Signal-to-Noise Ratio | 100dB (line) |
Speaker load impedance | 8Ω to 16Ω |
Power Output | 100W per channel (8 ohms, 20Hz-20kHz, 0.015% THD) |
Frequency Response | 20Hz to 20kHz |
Risk of electric shock, opening unit, and symbols.
Precautions against water, moisture, ventilation, and placement.
Key advice before initial use, including location and care.
Guidance on antenna grounding and electrical safety.
Visual list and names of included accessories.
Identification and layout of front panel buttons and displays.
Identification of rear panel input/output jacks and terminals.
Diagram showing the buttons and functions of the remote.
Visual guide for connecting various audio/video components.
Visual examples (A, B, C) for optimal rear speaker positioning.
Detailed description of front panel indicators and buttons.
Explanation of input selection and surround mode settings.
Details on volume, loudness, tuning mode, and FM/AM selection.
Explains rear panel jacks, AC outlets, and balance control.
Detailed functions of remote control keys for various components.
How to use remote keys for selecting tuner stations and input sources.
Remote control operations for tape decks and video players.
Remote functions for video playback, sound selection, and power.
How to install batteries and connect AM/FM antennas.
Advice on positioning and using indoor/outdoor antennas.
Connecting speakers, turntable, CD/CDV players, tape decks, and VCRs.
How to connect compatible YAMAHA components for remote control.
Procedures for auto tuning, manual tuning, and preset tuning.
How to record radio, dub tapes, and record video sources.
Details on Simulated, Dolby, and Natural Surround processing.
Optimal placement of rear speakers for desired sound field effects.
How to adjust input balance for optimal surround sound.
Programming the remote to learn signals from other transmitters.
Identifies learning keys, indicators, and switches on the remote.
Step-by-step guide to programming the remote.
How to reset learned signals using the RESET switch.
Notes on using the remote for operating audio/video equipment.
Table of common symptoms, causes, and remedies for receiver problems.
Detailed technical specs for audio output/input and video sections.
Technical specifications for FM reception.
Technical specs for AM reception, power supply, and dimensions.
Final list of supplied accessories.