To Next PageTo Next Page
Need help?Do you have a question about the Yamaha RX-A2030 and is the answer not in the manual?
General| Receiver type | - |
|---|---|
| Pre-out channels | 7.2 |
| Pre-out connectivity | Yes |
| Audio output channels | 9.2 channels |
| Dynamic power per channel (4 Ohm) | 285 W |
| Dynamic power per channel (8 Ohm) | 165 W |
| Power output per channel (20-20KHz@8 Ohm) | 140 W |
| HDMI in | 8 |
| Audio (L/R) in | 10 |
| Remote (IR) input | 2 |
| Composite video in | 5 |
| USB ports quantity | 1 |
| Digital audio coaxial in | 3 |
| Component video (YPbPr/YCbCr) in | 4 |
| Headphone connectivity | 6.3 mm |
| Digital audio coaxial out | 0 |
| AM band range | 522 - 1.620 kHz |
| FM band range | 87.5 - 108 MHz |
| Supported radio bands | AM, FM |
| Card reader integrated | No |
| Display | LED |
| Product color | Black |
| Audio decoders | Dolby Digital Plus, Dolby Pro Logic IIx, Dolby TrueHD, DTS-HD Master Audio |
| Apple docking compatibility | Not supported |
| AC input voltage | 100-240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (standby) | 0.35 W |
Weight and Dimensions| Depth | 467 mm |
|---|---|
| Width | 435 mm |
| Height | 192 mm |
| Weight | 17100 g |
Lists the accessories supplied with the product, such as remote control, batteries, and antennas.
Lists the cables needed for system setup, including speaker, HDMI, and audio cables.
Instructions for connecting front and center speakers to the unit's terminals.
Instructions for connecting surround speakers to the unit's SURROUND terminals.
Details on preparing speaker cables, including stripping insulation and connecting wires.
Instructions for using banana plugs for speaker connections, specific to certain regions.
Instructions for connecting surround back speakers to the SURROUND BACK terminals.
Instructions for connecting front presence speakers to the EXTRA SP 1 terminals.
Instructions for connecting the subwoofer to the SUBWOOFER PREOUT jack.
Step-by-step guide for connecting BD/DVD player and TV using HDMI and optical cables.
Instructions to power on all connected devices after setup.
Guide on selecting the correct input source on the TV to view content from the unit.
Guides the user to connect the YPAO microphone to the designated jack on the unit.
Prepares the user for YPAO by setting up the subwoofer and microphone placement.
Instructions on how to initiate the YPAO measurement process via the on-screen menu.
Guides the user to select whether to save or cancel the YPAO measurement results.
Final step to disconnect the YPAO microphone once optimization is complete.
Provides troubleshooting steps for the 'Out of Phase' warning during YPAO.
Step to select the correct input source for the BD/DVD player.
Instruction to begin playback on the connected BD/DVD player.
Guides the user to select the desired sound mode for playback.
Instruction to adjust the listening volume using the unit's controls.
Troubleshooting tips for when surround sound is not functioning correctly.
