Yamaha RX-A3060 Firmware Update Manual

1
Choose from the following 2 methods to update to the latest firmware.
Click here for
Firmware Update Through the Internet
(Connection to the Internet is required)
Click here for
Firmware Update by USB
(A USB thumb drive is required)
In case of error, see the
Troubleshooting
section
IMPORTANT NOTICE
Do not attempt to update your Yamaha receiver using any other data file except those provided directly from the
Yamaha website or through your network connection.
Follow the instructions carefully and do not attempt any other procedures not specified in the instructions provided by
Yamaha.
Improperly updated products may cause improper operation, and any parts or service required to restore proper
operation will not be covered under the Yamaha Limited Warranty.
FIRMWARE UPDATING PROCEDURE

Yamaha RX-A3060 Specifications

General

Receiver type	stereo
Pre-out channels	11.2
Pre-out connectivity	Yes
Audio output channels	9.2 channels
Total Harmonic Distortion (THD)	10 %
Dynamic power per channel (4 Ohm)	295 W
Dynamic power per channel (8 Ohm)	175 W
Power output per channel (20-20KHz@8 Ohm)	150 W
HDMI in	8
Audio (L/R) in	9
Remote (IR) input	1
Composite video in	5
Component video (YPbPr/YCbCr) in	3
Number of HDMI outputs	2
Digital audio optical out	0
Connectivity technology	Wired & Wireless
Speakers connectivity type	3.5mm
Supported radio bands	AM, FM
Optical drive included	No
Supported graphics resolutions	4096 x 2160
Display	LCD
Product color	Black
Audio decoders	DTS, DTS-HD, Dolby Digital Plus, Dolby Pro Logic IIx, Dolby TrueHD
Power consumption (standby)	0.1 W

Weight and Dimensions

Depth	474 mm
Width	435 mm
Height	192 mm
Weight	18100 g