Yamaha RX-A2000 - User Manual

Other manuals for Yamaha RX-A2000

Questions and Answers

C
calebstanleyJul 26, 2025
Why is my Yamaha Receiver remote control not working?
- D
  Donald MckayJul 26, 2025
  Your Yamaha Receiver's remote control might not be working due to several reasons. First, ensure you are within the operational range of 20 ft (6 m) and within a 30-degree angle from the front panel. Also, strong light sources like direct sunlight or fluorescent lamps can interfere with the remote control sensor. Try adjusting the lighting or repositioning the Yamaha Receiver. Weak batteries can also cause the remote to malfunction; replace all batteries to resolve this. Finally, verify that the remote control ID matches the Yamaha Receiver's ID and adjust if necessary.
M
mwardJul 31, 2025
How to fix a Yamaha RX-A2000 remote that is not working?
- Y
  ywilliamsJul 31, 2025
  If your Yamaha Receiver's remote control isn't working, consider these potential causes: * **Distance/Angle:** Ensure you're within 6 meters and no more than 30 degrees off-axis from the receiver's front panel. * **Interference:** Adjust the lighting or reposition the receiver if direct sunlight or certain lights are affecting the remote sensor. * **Battery:** Replace weak batteries. * **Remote ID:** Match the remote control ID of the unit and the remote control.
D
deborah21Aug 7, 2025
What to do if Yamaha Receiver remote can't control external components?
- S
  Steven BellAug 7, 2025
  If external components aren't responding to your Yamaha Receiver's remote, here's what to try: 1. **Remote Control Code:** Ensure the remote control code is correctly set using the “Remote control code search” on the CD-ROM. 2. **Alternative Code:** Try setting another code for the same manufacturer using the “Remote control code search” on the CD-ROM. 3. **Button Functionality:** If Cursor buttons aren't working during DVD menu operation, press the Input selector again. For Option/Setup menu issues, press SOURCE/RECEIVER (orange glow) and retry.
O
ohernandezAug 12, 2025
What to do if Yamaha RX-A2000 Receiver remote control is not working?
- A
  Anthony HarrisAug 13, 2025
  If the Yamaha Receiver remote control isn't working, start by checking the batteries and replacing them if they're weak. Ensure that you are within 20 ft (6 m) and 30 degrees of the front panel for the remote to function correctly. Also, check for any direct sunlight or strong lighting that may be interfering with the remote sensor; adjust the lighting or move the Yamaha Receiver. Finally, make sure the remote control ID matches the ID of the Yamaha Receiver.
J
Justin MezaAug 18, 2025
How to fix Yamaha RX-A2000 remote control?
- L
  Lauren KennedyAug 18, 2025
  To fix a Yamaha Receiver remote that isn't working, try the following: 1. Replace the batteries. 2. Make sure you're within 20 ft (6 m) and 30 degrees of the receiver. 3. Adjust lighting or move the receiver to avoid interference with the remote sensor. 4. Check and match the remote control ID with the receiver's ID.

Yamaha RX-A2000 Specifications

General

Channels	7.2
Audio D/A Converter	192kHz/24-bit
HDMI Switching	Yes
Signal-To-Noise Ratio	100 dB
Network Connectivity	Yes
Bluetooth	No
AirPlay	Yes
DLNA	Yes
Weight	37.5 lbs
Amplifier Output Details	140 W (8 ohms, 20 Hz-20 kHz, 0.06% THD, 2 channels driven)
Surround Sound	Dolby TrueHD, DTS-HD Master Audio
Video Upscaling	Yes
Input Impedance	47 kOhm
Input Sensitivity	200 mV
Network Features	vTuner
USB Port	Yes
Internet Streaming Services	vTuner