Need help?Do you have a question about the Yamaha RX-A2010 and is the answer not in the manual?
General| Receiver type | - |
|---|---|
| RMS rated power | 1980 W |
| Audio output channels | 9.2 channels |
| Dynamic power per channel (4 Ohm) | 285 W |
| Dynamic power per channel (8 Ohm) | 165 W |
| Power output per channel (1KHz@8 Ohm) | 220 W |
| Power output per channel (20-20KHz@8 Ohm) | 140 W |
| HDMI in | 8 |
| Remote control in | 2 |
| Composite video in | 5 |
| Digital audio coaxial in | 3 |
| Component video (YPbPr/YCbCr) in | 4 |
| Component video (YPbPr/YCbCr) out | 1 |
| 12V trigger | Yes |
| Ethernet LAN | No |
| Supported radio bands | AM, FM |
| Product color | Titanium |
| Audio decoders | Dolby Digital Plus, Dolby Pro Logic IIx, Dolby TrueHD, DTS-HD Master Audio |
| Power consumption (standby) | 0.3 W |
Weight and Dimensions| Depth | 467 mm |
|---|---|
| Width | 435 mm |
| Height | 192 mm |
| Weight | 17100 g |
To Next Page
