Yamaha RX-A2010 Easy Setup Guide

Check that the following accessories are supplied with this product.
You need to separately prepare the following cables to build the system based on this
document.
■ Speaker cables (x 9)
■ HDMI cable (x 2)
■ Audio pin cable (x 1)
■ Digital optical cable or stereo pin cable (x 1) (unnecessary if your TV supports ARC)
1 Preparations
Accessories
■ Remote control ■ Batteries (AAA, R03, UM-4) (x 4)
Insert into the remote control in the correct polarity (+/-)
■ Simplified remote control ■ Power cable
* The figure of the supplied power
cable differs depending on regions.
■ YPAO microphone
■ AM antenna ■ FM antenna
* The figure of the supplied FM
antenna differs depending on
regions.
■ CD-ROM
(Owner’s Manual)
■ Safety Brochure ■ Easy Setup Guide
(this document)
Cables necessary for connections
Easy Setup Guide
English for U.S.A.
AV Receiver
This document explains how to set up a 9.1-channel system and
play back surround sound of a BD/DVD on this unit.
For more information, refer to “Owner’s Manual” on the supplied
CD-ROM.
A PDF format of this guide and “Owner’s Manual” can be downloaded
from the following website.
http://download.yamaha.com/

Yamaha RX-A2010 Specifications

General

Receiver type	-
RMS rated power	1980 W
Audio output channels	9.2 channels
Dynamic power per channel (4 Ohm)	285 W
Dynamic power per channel (8 Ohm)	165 W
Power output per channel (1KHz@8 Ohm)	220 W
Power output per channel (20-20KHz@8 Ohm)	140 W
HDMI in	8
Remote control in	2
Composite video in	5
Digital audio coaxial in	3
Component video (YPbPr/YCbCr) in	4
Component video (YPbPr/YCbCr) out	1
12V trigger	Yes
Ethernet LAN	No
Supported radio bands	AM, FM
Product color	Titanium
Audio decoders	Dolby Digital Plus, Dolby Pro Logic IIx, Dolby TrueHD, DTS-HD Master Audio
Power consumption (standby)	0.3 W

Weight and Dimensions

Depth	467 mm
Width	435 mm
Height	192 mm
Weight	17100 g