Yamaha RX-A1060 - User Manual

To Next Page

Choose from the following 2 methods to update to the latest firmware.

Click here for

Firmware Update Through the Internet

(Connection to the Internet is required)

Click here for

Firmware Update by USB

(A USB thumb drive is required)

In case of error, see the

Troubleshooting

section

IMPORTANT NOTICE

Do not attempt to update your Yamaha receiver using any other data file except those provided directly from the

Yamaha website or through your network connection.

Follow the instructions carefully and do not attempt any other procedures not specified in the instructions provided by

Yamaha.

Improperly updated products may cause improper operation, and any parts or service required to restore proper

operation will not be covered under the Yamaha Limited Warranty.

FIRMWARE UPDATING PROCEDURE

Need help?

Do you have a question about the Yamaha RX-A1060 and is the answer not in the manual?

Summary

Procedure for updating firmware using an internet connection, involving advanced setup and network update.

Procedure for updating firmware using a USB thumb drive, including file preparation and advanced setup.

Solutions for common firmware update errors and failures, including internet and USB update issues.

General

Channels	7.2
Surround Sound Processing	Dolby Atmos, DTS:X
Power Output (8 ohms)	110W per channel
Total Harmonic Distortion (THD)	0.06%
Frequency Response	10Hz - 100kHz
HDMI Inputs	8
HDMI Outputs	2
Audio Formats Supported	Dolby TrueHD, DTS-HD Master Audio
Network Connectivity	Wi-Fi, Ethernet
HDMI Pass-through	4K Ultra HD pass-through with HDCP 2.2 support
HDR Compatible	HDR10, Dolby Vision
Bluetooth	Yes
AirPlay	Yes
USB Input	Yes (Front)
AV Input	4 (Composite)
Zone Output	Zone 2
Inputs	HDMI, Composite Video, Digital Audio Optical, Digital Audio Coaxial, Analog Audio, Phono
Outputs	2 HDMI, 1 composite