Yamaha RX-A1010BL User Manual

Check that the following accessories are supplied with this product.
You need to separately prepare the following cables to build the system based on this
document.
■ Speaker cables (depending on the number of speakers)
■ HDMI cable (x 2)
■ Audio pin cable (x 1)
■ Digital optical cable or stereo pin cable (x 1) (unnecessary if your TV supports ARC)
1 Preparations
Accessories
Cables necessary for connections
■ CD-ROM
(Owner’s Manual)
■ Safety Brochure ■ Easy Setup Guide
(this document)
■ Remote control ■ Batteries (AAA, R03, UM-4) (x 2)
Insert into the remote control in the correct polarity (+/-).
* The figure of the supplied power cable differs
depending on regions.
■ YPAO microphone ■ Power cable
■ AM antenna ■ FM antenna
*The figure of the supplied FM
antenna differs depending on
regions.
Easy Setup Guide
English for Canada, Europe, Asia,
Africa, Oceania and Latin America
AV Receiver
This document explains how to set up a 5.1- or 7.1-channel
system and play back surround sound of a BD/DVD on this unit.
For more information, refer to “Owner’s Manual” on the supplied
CD-ROM.
A PDF format of this guide and “Owner’s Manual” can be downloaded
from the following website.
http://download.yamaha.com/

Yamaha RX-A1010BL Specifications

General

Channels	7.2
HDMI Inputs	8
HDMI Outputs	2
Multi-Room Capability	Yes
Response Bandwidth	10 Hz - 100 kHz
Signal-To-Noise Ratio	100 dB
HDMI Pass-Through	Yes
Audio DAC	192 kHz/24-bit
HDMI Switching	Yes
3D Technology	Yes
DLNA	Yes
Video Upscaling	Yes
AirPlay	Yes
Phono Input	Yes
Power Output (8 ohms)	110 W
Audio Formats Supported	Dolby TrueHD, DTS-HD Master Audio
Network Connectivity	Ethernet, Wi-Fi
Internet Streaming Services	vTuner
Dimensions (W x H x D)	435 x 171 x 367.5 mm
Amplifier Output Details	110W (8 ohms, 20Hz-20kHz, 0.06% THD, 2 ch driven)

Summary

Yamaha RX-A1010 Preparations

Accessories Included

Lists the accessories supplied with the AV receiver.

Necessary Connection Cables

Lists the cables required to set up the system.

Speaker Placement Guide

5.1-Channel System Setup

Diagram illustrating the placement of speakers for a 5.1 system.

7.1-Channel System Setup

Diagram illustrating the placement of speakers for a 7.1 system.

Connecting Speakers and Subwoofer

Speaker Cable Connection Method

Detailed instructions on how to connect speaker cables properly.

Using Banana Plugs

Instructions for connecting speakers using banana plugs.

Connecting External Devices

Connect Audio and Video Sources

Instructions for connecting BD/DVD player and TV via HDMI and other cables.

Power On Sequence

Steps to turn on the AV receiver, TV, and BD/DVD player.

Select Correct TV Input

How to switch the TV input to display content from the receiver.

Automatic Speaker Setup with YPAO

YPAO Preparation Steps

Prepares the unit and environment for automatic speaker calibration.

Connect YPAO Microphone

Connect the YPAO microphone to the receiver's front panel.

Start YPAO Measurement

Initiate the YPAO measurement process using the remote control.

Save YPAO Settings

Save the results of the automatic speaker optimization.

Finalize YPAO Disconnection

Disconnect the YPAO microphone after optimization is complete.

Playback Operations

Playing Back BD/DVD Content

Guide to playing back multichannel audio from BD/DVD.

Troubleshooting Surround Sound

Addresses issues with no surround sound or sound from specific speakers.