Why is the PC server or Internet Radio not working on my Yamaha Receiver?
If the PC server or Internet Radio is not functioning properly on your Yamaha Receiver, the IP address may not be set correctly. Set the DHCP server function of the router to ON. Alternatively, manually configure the settings according to your current operating environment. Also, ensure the network cable is properly connected.
What to do if my Yamaha RX-A1000 Receiver does not display a USB device?
If your Yamaha Receiver does not display a USB device, it may have recognized the USB storage device as an illegal device. Turn the unit off and then on again.
What does it mean when the HDMI indicator is flashing on my Yamaha RX-A1000 Receiver?
If the front panel display HDMI indicator is flashing on your Yamaha Receiver, it indicates an error with the HDMI connection. Try re-inserting the HDMI cable. Also, confirm that the unit is not receiving HDMI video that it does not support by checking the Information menu under “Video Signal information”.
How to fix no picture on my Yamaha RX-A1000 Receiver?
If you're not getting any picture from your Yamaha Receiver, the video signal output may not be supported by the connected monitor via the HDMI OUT 1-2 jacks. Try resetting the video parameters by displaying the Advanced Setup menu and selecting “VIDEO” in “INITIALIZE”. You can also set “MONITOR CHECK” to “YES” in the Advanced Setup menu. Ensure that an appropriate video input is selected on the TV.
What to do if my Yamaha RX-A1000 power will not turn on?
If the power on your Yamaha Receiver will not turn on, it's possible the protection circuitry has operated 3 times consecutively. As a safety precaution, the ability to turn on the power is disabled. Contact your nearest Yamaha dealer or service center to request repair.
Why does my Yamaha Receiver keep entering standby mode?
If your Yamaha Receiver enters standby mode, it could be due to the protection circuitry being activated. Ensure the speaker impedance is at least 6 ?. Check that the speaker impedance settings are correct. Also, make sure the speaker wires are not touching each other, then turn the unit back on. The sleep timer may have turned off the unit, so turn on the unit, and play the source again.
How to stop my Yamaha RX-A1000 Receiver from going into standby mode after a countdown?
If your Yamaha Receiver displays a countdown and then goes into standby mode, it's likely due to the Auto Power Down function. Turn the unit back on and play the source again. To prevent this, you can increase the time before the unit switches to standby mode or disable the Auto Power Down function in the Setup menu under “Function” ? “Auto Power Down”.
What to do if my Yamaha RX-A1000 Receiver cannot be turned off or does not work properly?
If your Yamaha Receiver cannot be turned off or isn't working properly, the internal microcomputer may be stuck due to an external electric shock or a drop in power supply voltage. To resolve this, disconnect the power cable from the AC wall outlet, wait about 30 seconds, and then plug it back in. Also, check if the batteries in the remote control need replacing.
What to do if my Yamaha RX-A1000 enters standby mode soon after turning on?
If your Yamaha Receiver turns off soon after being turned on, ensure the power cable is fully inserted into the AC wall outlet. Also, if you see “CHECK SP WIRES!” displayed, it means the protection circuitry was activated due to a shorted speaker cable. Ensure all speaker cables between the unit and speakers are properly connected.
Why is my Yamaha RX-A1000 remote control not working?
If your Yamaha Receiver's remote control isn't working, first, ensure you're within a 6-meter range and a 30-degree angle from the front panel. Strong sunlight or certain lights may interfere, so adjust the lighting or reposition the unit. Weak batteries can also be the culprit; try replacing them. Finally, check that the remote control ID matches the receiver's ID.
Procedure to select the language for menus and messages on the TV screen.
Lists all the accessories that are supplied with the product for initial setup.
Explains how to use the on-screen display for unit operations and settings.
Overview of the unit's key features, including amplifier, connectivity, and playback options.
Identifies and describes the various controls, indicators, and connections on the unit.
Identifies and describes the controls and indicators on the front panel of the unit.
Details the various input and output jacks located on the rear panel of the unit.
Identifies and describes the buttons and functions of the supplied remote control.
Describes the different on-screen displays available for unit operation and settings.
Instructions for connecting various speakers, including setup and configuration details.
Explains the role of different speaker configurations in creating a surround sound environment.
Details various speaker layout configurations for optimal surround sound.
Procedure to adjust the unit's speaker impedance setting for compatibility with different speaker loads.
Guide to connecting various external audio and video devices to the unit.
Identifies and describes the various input/output jacks and necessary cables for external connections.
Guide on connecting the unit to a TV via HDMI or analog video connections.
Instructions for connecting playback devices like BD/DVD players to the unit's various inputs.
Steps for connecting the unit to a network for internet radio and PC music playback.
Instructions for connecting USB devices for music playback.
Instructions for connecting the supplied FM and AM antennas for optimal reception.
Procedure for automatic speaker setup using the YPAO function for optimal sound.
Steps for playing back audio and video sources connected to the unit.
How to choose which HDMI output jacks are used for signal output.
Adjusts treble and bass levels for front speakers or headphones to shape the sound tone.
Explains how the SCENE function allows one-button switching of multiple settings like input and sound programs.
Guide to choosing sound programs and decoders for different audio sources and listening experiences.
Instructions for using straight decoding mode for pure audio playback without sound field effects.
Instructions for using Pure Direct Mode to achieve the purest high-fidelity sound by minimizing circuitry.
How to use the Compressed Music Enhancer to improve sound quality of compressed audio files.
Overview of available sound programs optimized for movies, music, and other sources.
Basic operations for configuring input, scene, and sound programs using the on-screen display.
Explains how to access and use the Option menu to customize settings for each input source.
Details on adjusting tone control, DRC, DSP modes, and dialogue lift within the Option menu.
How to view and operate content from various sources (USB, PC, Internet Radio, iPod) using the content window.
Instructions for tuning into FM and AM radio stations, including manual and preset tuning.
Guide to receiving and selecting audio programs from HD Radio broadcasts.
Instructions for connecting a SIRIUS tuner and listening to satellite radio channels.
How to register and recall SIRIUS channels using preset numbers for quick access.
Steps for setting up and playing music files from a PC connected via the network.
Instructions for playing music files stored on USB memory devices or portable players.
Guide to accessing and listening to Internet Radio stations via the vTuner service.
Instructions for accessing and using the Rhapsody music service, including account sign-in.
Guide to accessing and listening to SIRIUS Internet Radio stations.
Instructions for playing music and video from iPod/iPhone devices connected via dock or wirelessly.
Guide to setting up and playing audio wirelessly from iPod/iPhone devices.
Guide to connecting and playing audio wirelessly from Bluetooth-compatible devices.
Instructions for operating the unit's functions remotely using a web browser over the network.
How to configure input sources, including changing names, icons, and settings.
Guide to customizing SCENE settings, including scene names, icons, and associated functions.
Details on adjusting sound field parameters for various sound programs and decoders.
Details on adjusting CINEMA DSP parameters like DSP Level, Initial Delay, and Room Size for customized sound fields.
Overview of various system settings available for configuration.
How to configure speaker parameters, including automatic setup, manual adjustments, and speaker configuration.
Configuration options for the subwoofer, including Extra Bass and Bass Cross Over settings.
Manually adjusting speaker distance from the listening position and individual speaker volume levels.
Adjusts sound quality using a parametric equalizer for fine-tuning speaker response.
Options for configuring audio output, including Lipsync, dynamic range, and volume settings.
Configuration options for HDMI control, including receiver operation, output selection, and audio return channel.
Guide to operating connected HDMI devices like TVs and players using the unit's remote control.
How to enable the Audio Return Channel function for TV audio transmission via HDMI.
Steps for configuring network settings such as IP address, network standby, and MAC address filtering.
How to configure multi-zone audio systems, including Zone2 volume and party mode settings.
Customizing receiver functions like auto power down, input assignment, and display settings for user convenience.
How to reassign coaxial, optical, and component video jacks to different input sources.
How to enable memory guard to prevent accidental changes to unit settings.
How to select the display language for menus and messages.
How to view system information, including audio, video, HDMI, and network status.
Displays detailed information about the current audio signal format, sampling rate, and channels.
How to set up and use the remote control for operating external components.
Procedure for registering remote control codes to operate external devices like DVD players.
Accessing advanced settings for unit initialization, firmware updates, and other extended functions.
How to adjust the unit's speaker impedance setting for compatibility with different speaker loads.
How to save and restore unit settings, and initialize settings to default values.
Instructions for updating the unit's firmware via USB or network for new features and fixes.
Guide to operating connected HDMI devices like TVs and players using the unit's remote control.
How to enable the Audio Return Channel function for TV audio transmission via HDMI.
How to configure and use the multi-zone audio system to play sources in different rooms.
Steps for connecting audio and video equipment for Zone2 operation.
How to use the REMOTE IN/OUT jacks for remote control of the unit and other components from Zone2.
Operations for selecting input sources, adjusting volume, and using the sleep timer for Zone2.
Common problems and solutions for unit malfunction and operational issues.
Common problems and their solutions related to power, standby mode, and basic unit operation.
Common problems and solutions related to HDMI connections, including noise, picture/sound loss, and control function errors.
Solutions for problems with FM/AM radio reception, tuning, and preset functions.
Solutions for problems encountered with USB devices, PC servers, and network connectivity.
Solutions for problems related to iPod/iPhone connection, recognition, and playback.
Solutions for problems with the remote control not working or controlling external components.
Definitions of various audio technologies and formats like Lipsync, Bi-amplification, and Dolby Digital.
Details on HDMI signal compatibility, including audio and video signal formats supported by the unit.
Technical specifications for the unit's input and output terminals, including number and type of connections.
Technical specifications related to audio performance, including headroom, damping, and input sensitivity.
Lists the essential accessories and external components required for initial setup and operation.
Step-by-step guide for the initial connection and installation of the unit and its components.
Instructions for physically connecting speakers and subwoofers to the unit's terminals.
Instructions for connecting the unit to a TV via HDMI or analog video connections.
Instructions for connecting external devices such as BD/DVD players for playback.
Steps for connecting the unit to a power source using the supplied power cable.
Procedure for using the YPAO function to automatically optimize speaker settings for the listening environment.
Final steps to save the YPAO settings and complete the automatic speaker setup process.
How to switch the unit between on and standby modes using the power key.
How to select the desired input source to listen to audio or view video from connected devices.
How to switch between preset scenes, which include input sources and sound field programs.
How to adjust the unit's volume level using the volume controls on the unit or remote.
How to mute the audio output temporarily using the MUTE button.
Guide to choosing sound programs and decoders for different playback scenarios and desired audio effects.
How to activate the Compressed Music Enhancer to improve sound quality of compressed audio.
Critical instructions to read carefully before operating the unit to ensure safe and optimal performance.
Important notes regarding the proper use, handling, and maintenance of the remote control and its batteries.
Statement regarding FCC compliance and product usage guidelines for US customers.
Procedure to select the language for menus and messages on the TV screen.
Lists all the accessories that are supplied with the product for initial setup.
Explains how to use the on-screen display for unit operations and settings.
Overview of the unit's key features, including amplifier, connectivity, and playback options.
Identifies and describes the various controls, indicators, and connections on the unit.
Identifies and describes the controls and indicators on the front panel of the unit.
Details the various input and output jacks located on the rear panel of the unit.
Identifies and describes the buttons and functions of the supplied remote control.
Describes the different on-screen displays available for unit operation and settings.
Instructions for connecting various speakers, including setup and configuration details.
Explains the role of different speaker configurations in creating a surround sound environment.
Details various speaker layout configurations for optimal surround sound.
Procedure to adjust the unit's speaker impedance setting for compatibility with different speaker loads.
Guide to connecting various external audio and video devices to the unit.
Identifies and describes the various input/output jacks and necessary cables for external connections.
Guide on connecting the unit to a TV via HDMI or analog video connections.
Instructions for connecting playback devices like BD/DVD players to the unit's various inputs.
Steps for connecting the unit to a network for internet radio and PC music playback.
Instructions for connecting USB devices for music playback.
Instructions for connecting the supplied FM and AM antennas for optimal reception.
Procedure for automatic speaker setup using the YPAO function for optimal sound.
Steps for playing back audio and video sources connected to the unit.
How to choose which HDMI output jacks are used for signal output.
Adjusts treble and bass levels for front speakers or headphones to shape the sound tone.
Explains how the SCENE function allows one-button switching of multiple settings like input and sound programs.
Guide to choosing sound programs and decoders for different audio sources and listening experiences.
Instructions for using straight decoding mode for pure audio playback without sound field effects.
Instructions for using Pure Direct Mode to achieve the purest high-fidelity sound by minimizing circuitry.
How to use the Compressed Music Enhancer to improve sound quality of compressed audio files.
Overview of available sound programs optimized for movies, music, and other sources.
Basic operations for configuring input, scene, and sound programs using the on-screen display.
Explains how to access and use the Option menu to customize settings for each input source.
Details on adjusting tone control, DRC, DSP modes, and dialogue lift within the Option menu.
How to view and operate content from various sources (USB, PC, Internet Radio, iPod) using the content window.
Instructions for tuning into FM and AM radio stations, including manual and preset tuning.
Guide to receiving and selecting audio programs from HD Radio broadcasts.
Instructions for connecting a SIRIUS tuner and listening to satellite radio channels.
How to register and recall SIRIUS channels using preset numbers for quick access.
Steps for setting up and playing music files from a PC connected via the network.
Instructions for playing music files stored on USB memory devices or portable players.
Guide to accessing and listening to Internet Radio stations via the vTuner service.
Instructions for accessing and using the Rhapsody music service, including account sign-in.
Guide to accessing and listening to SIRIUS Internet Radio stations.
Instructions for playing music and video from iPod/iPhone devices connected via dock or wirelessly.
Guide to setting up and playing audio wirelessly from iPod/iPhone devices.
Guide to connecting and playing audio wirelessly from Bluetooth-compatible devices.
Instructions for operating the unit's functions remotely using a web browser over the network.
How to configure input sources, including changing names, icons, and settings.
Guide to customizing SCENE settings, including scene names, icons, and associated functions.
Details on adjusting sound field parameters for various sound programs and decoders.
Details on adjusting CINEMA DSP parameters like DSP Level, Initial Delay, and Room Size for customized sound fields.
Overview of various system settings available for configuration.
How to configure speaker parameters, including automatic setup, manual adjustments, and speaker configuration.
Configuration options for the subwoofer, including Extra Bass and Bass Cross Over settings.
Manually adjusting speaker distance from the listening position and individual speaker volume levels.
Adjusts sound quality using a parametric equalizer for fine-tuning speaker response.
Options for configuring audio output, including Lipsync, dynamic range, and volume settings.
Configuration options for HDMI control, including receiver operation, output selection, and audio return channel.
Guide to operating connected HDMI devices like TVs and players using the unit's remote control.
How to enable the Audio Return Channel function for TV audio transmission via HDMI.
Steps for configuring network settings such as IP address, network standby, and MAC address filtering.
How to configure multi-zone audio systems, including Zone2 volume and party mode settings.
Customizing receiver functions like auto power down, input assignment, and display settings for user convenience.
How to reassign coaxial, optical, and component video jacks to different input sources.
How to enable memory guard to prevent accidental changes to unit settings.
How to select the display language for menus and messages.
How to view system information, including audio, video, HDMI, and network status.
Displays detailed information about the current audio signal format, sampling rate, and channels.
How to set up and use the remote control for operating external components.
Procedure for registering remote control codes to operate external devices like DVD players.
Accessing advanced settings for unit initialization, firmware updates, and other extended functions.
How to adjust the unit's speaker impedance setting for compatibility with different speaker loads.
How to save and restore unit settings, and initialize settings to default values.
Instructions for updating the unit's firmware via USB or network for new features and fixes.
Guide to operating connected HDMI devices like TVs and players using the unit's remote control.
How to enable the Audio Return Channel function for TV audio transmission via HDMI.
How to configure and use the multi-zone audio system to play sources in different rooms.
Steps for connecting audio and video equipment for Zone2 operation.
How to use the REMOTE IN/OUT jacks for remote control of the unit and other components from Zone2.
Operations for selecting input sources, adjusting volume, and using the sleep timer for Zone2.
Common problems and solutions for unit malfunction and operational issues.
Common problems and their solutions related to power, standby mode, and basic unit operation.
Common problems and solutions related to HDMI connections, including noise, picture/sound loss, and control function errors.
Solutions for problems with FM/AM radio reception, tuning, and preset functions.
Solutions for problems encountered with USB devices, PC servers, and network connectivity.
Solutions for problems related to iPod/iPhone connection, recognition, and playback.
Solutions for problems with the remote control not working or controlling external components.
Definitions of various audio technologies and formats like Lipsync, Bi-amplification, and Dolby Digital.
Details on HDMI signal compatibility, including audio and video signal formats supported by the unit.
Technical specifications for the unit's input and output terminals, including number and type of connections.
Technical specifications related to audio performance, including headroom, damping, and input sensitivity.
Lists the essential accessories and external components required for initial setup and operation.
Step-by-step guide for the initial connection and installation of the unit and its components.
Instructions for physically connecting speakers and subwoofers to the unit's terminals.
Instructions for connecting the unit to a TV via HDMI or analog video connections.
Instructions for connecting external devices such as BD/DVD players for playback.
Steps for connecting the unit to a power source using the supplied power cable.
Procedure for using the YPAO function to automatically optimize speaker settings for the listening environment.
Final steps to save the YPAO settings and complete the automatic speaker setup process.
How to switch the unit between on and standby modes using the power key.
How to select the desired input source to listen to audio or view video from connected devices.
How to switch between preset scenes, which include input sources and sound field programs.
How to adjust the unit's volume level using the volume controls on the unit or remote.
How to mute the audio output temporarily using the MUTE button.
Guide to choosing sound programs and decoders for different playback scenarios and desired audio effects.
How to activate the Compressed Music Enhancer to improve sound quality of compressed audio.
Critical instructions to read carefully before operating the unit to ensure safe and optimal performance.
Important notes regarding the proper use, handling, and maintenance of the remote control and its batteries.
Statement regarding FCC compliance and product usage guidelines for US customers.
General| Channels | 7.2 |
|---|---|
| HDMI Inputs | 6 |
| HDMI Outputs | 2 |
| Component Video Input/Output | 3/1 |
| Phono Input | Yes |
| Audio Formats Supported | Dolby TrueHD, DTS-HD Master Audio |
| Network Capability | Yes |
| Bluetooth | No |
| Digital Audio Input/Output: Optical | 1 Output |
| Analog Audio Input/Output | 1 Output |
| Streaming Services | Pandora, vTuner |
| Frequency Response | 10 Hz-100 kHz |
| Total Harmonic Distortion | 0.06% |
| Input Sensitivity | 200 mV |
| Signal-to-Noise Ratio | 100 dB |
| Network Features | DLNA |
| Dimensions (W x H x D) mm | 435 x 182 x 430.5 |
To Next Page
