Yamaha RX-A1000 User Manual

Owner’s Manual
AV Receiver English for U.S.A.

Yamaha RX-A1000 Specifications

General

Channels	7.2
HDMI Inputs	6
HDMI Outputs	2
Component Video Input/Output	3/1
Phono Input	Yes
Audio Formats Supported	Dolby TrueHD, DTS-HD Master Audio
Network Capability	Yes
Bluetooth	No
Digital Audio Input/Output: Optical	1 Output
Analog Audio Input/Output	1 Output
Streaming Services	Pandora, vTuner
Frequency Response	10 Hz-100 kHz
Total Harmonic Distortion	0.06%
Input Sensitivity	200 mV
Signal-to-Noise Ratio	100 dB
Network Features	DLNA
Dimensions (W x H x D) mm	435 x 182 x 430.5

Summary

BEFORE USE

Language selection

Procedure to select the language for menus and messages on the TV screen.

Supplied accessories

Lists all the accessories that are supplied with the product for initial setup.

INTRODUCTION

Using the TV OSD to Operate the Unit

Explains how to use the on-screen display for unit operations and settings.

Features and Capabilities

Overview of the unit's key features, including amplifier, connectivity, and playback options.

Part Names and Functions

Identifies and describes the various controls, indicators, and connections on the unit.

Front Panel

Identifies and describes the controls and indicators on the front panel of the unit.

Rear Panel

Details the various input and output jacks located on the rear panel of the unit.

Remote Control

Identifies and describes the buttons and functions of the supplied remote control.

On-Screen Display

Describes the different on-screen displays available for unit operation and settings.

CONNECTIONS

Connecting Speakers

Instructions for connecting various speakers, including setup and configuration details.

Speaker Channels and Functions

Explains the role of different speaker configurations in creating a surround sound environment.

Speaker Layout

Details various speaker layout configurations for optimal surround sound.

Changing Speaker Impedance

Procedure to adjust the unit's speaker impedance setting for compatibility with different speaker loads.

Connecting External Components

Guide to connecting various external audio and video devices to the unit.

Jacks and Cables

Identifies and describes the various input/output jacks and necessary cables for external connections.

Connecting a TV Monitor

Guide on connecting the unit to a TV via HDMI or analog video connections.

Connecting BD/DVD Players and Other Devices

Instructions for connecting playback devices like BD/DVD players to the unit's various inputs.

Connecting to the Network

Steps for connecting the unit to a network for internet radio and PC music playback.

Connecting a USB Storage Device

Instructions for connecting USB devices for music playback.

Connecting FM/AM Antennas

Instructions for connecting the supplied FM and AM antennas for optimal reception.

Setting Speaker Parameters Automatically (YPAO)

Procedure for automatic speaker setup using the YPAO function for optimal sound.

PLAYBACK

Basic Playback Procedure

Steps for playing back audio and video sources connected to the unit.

Selecting Active HDMI OUT Jack

How to choose which HDMI output jacks are used for signal output.

Adjusting High/Low-Frequency Sound (Tone Control)

Adjusts treble and bass levels for front speakers or headphones to shape the sound tone.

Changing Input Settings with SCENE Function

Explains how the SCENE function allows one-button switching of multiple settings like input and sound programs.

Selecting Sound Programs and Sound Decoders

Guide to choosing sound programs and decoders for different audio sources and listening experiences.

Enjoying Unprocessed Playback (Straight Decoding Mode)

Instructions for using straight decoding mode for pure audio playback without sound field effects.

Enjoying Hi-Fi Sound Quality (Pure Direct Mode)

Instructions for using Pure Direct Mode to achieve the purest high-fidelity sound by minimizing circuitry.

Enjoying Compressed Music Source with Better Sound Quality

How to use the Compressed Music Enhancer to improve sound quality of compressed audio files.

Sound Programs

Overview of available sound programs optimized for movies, music, and other sources.

Controlling Unit Via TV Screen

Basic operations for configuring input, scene, and sound programs using the on-screen display.

Configuring Settings for Individual Input Sources (Option Menu)

Explains how to access and use the Option menu to customize settings for each input source.

Adjusting Audio Settings (Option Menu)

Details on adjusting tone control, DRC, DSP modes, and dialogue lift within the Option menu.

Operating Input Sources via Content Window

How to view and operate content from various sources (USB, PC, Internet Radio, iPod) using the content window.

FM/AM Tuning

Instructions for tuning into FM and AM radio stations, including manual and preset tuning.

Listening to HD Radio™

Guide to receiving and selecting audio programs from HD Radio broadcasts.

Listening to SIRIUS Satellite Radio™

Instructions for connecting a SIRIUS tuner and listening to satellite radio channels.

Registering and Recalling SIRIUS Satellite Radio™ Channels

How to register and recall SIRIUS channels using preset numbers for quick access.

Playing Back Tunes from PC

Steps for setting up and playing music files from a PC connected via the network.

Playing Back Tunes from USB Storage Devices

Instructions for playing music files stored on USB memory devices or portable players.

Listening to Internet Radio

Guide to accessing and listening to Internet Radio stations via the vTuner service.

Using the Rhapsody® Service

Instructions for accessing and using the Rhapsody music service, including account sign-in.

Listening to SIRIUS Internet Radio

Guide to accessing and listening to SIRIUS Internet Radio stations.

Playing Back Tunes from iPod™/iPhone™

Instructions for playing music and video from iPod/iPhone devices connected via dock or wirelessly.

Playing iPod™/iPhone™ with Wireless Connection

Guide to setting up and playing audio wirelessly from iPod/iPhone devices.

Playing Back Tunes from Bluetooth™ Components

Guide to connecting and playing audio wirelessly from Bluetooth-compatible devices.

Controlling Unit via Web Browser (Web Control Center)

Instructions for operating the unit's functions remotely using a web browser over the network.

SETUP

Configuring Input Sources (Input Menu)

How to configure input sources, including changing names, icons, and settings.

Editing the SCENE Function (Scene Menu)

Guide to customizing SCENE settings, including scene names, icons, and associated functions.

Setting Sound Program Parameters (Sound Program Menu)

Details on adjusting sound field parameters for various sound programs and decoders.

CINEMA DSP Parameters

Details on adjusting CINEMA DSP parameters like DSP Level, Initial Delay, and Room Size for customized sound fields.

Setting Various Functions (Setup Menu)

Overview of various system settings available for configuration.

Managing Speaker Settings

How to configure speaker parameters, including automatic setup, manual adjustments, and speaker configuration.

Subwoofer Settings

Configuration options for the subwoofer, including Extra Bass and Bass Cross Over settings.

Setting Speaker Distance and Level

Manually adjusting speaker distance from the listening position and individual speaker volume levels.

Parametric EQ Settings

Adjusts sound quality using a parametric equalizer for fine-tuning speaker response.

Setting Audio Output Functions

Options for configuring audio output, including Lipsync, dynamic range, and volume settings.

Setting HDMI Functions

Configuration options for HDMI control, including receiver operation, output selection, and audio return channel.

Receiver Operation via TV (HDMI Control)

Guide to operating connected HDMI devices like TVs and players using the unit's remote control.

Enabling Audio Return Channel

How to enable the Audio Return Channel function for TV audio transmission via HDMI.

Adjusting Network Parameters

Steps for configuring network settings such as IP address, network standby, and MAC address filtering.

Setting Multi-Zone Functions

How to configure multi-zone audio systems, including Zone2 volume and party mode settings.

Making Receiver Easier to Use (Function Setup)

Customizing receiver functions like auto power down, input assignment, and display settings for user convenience.

Assigning Component Input/Output Jacks (Input Assignment)

How to reassign coaxial, optical, and component video jacks to different input sources.

Prohibiting Setting Changes (Memory Guard)

How to enable memory guard to prevent accidental changes to unit settings.

Language Selection

How to select the display language for menus and messages.

Confirming Unit Information (Information Menu)

How to view system information, including audio, video, HDMI, and network status.

Audio Signal Information

Displays detailed information about the current audio signal format, sampling rate, and channels.

Controlling Remote Control for Various Functions

How to set up and use the remote control for operating external components.

Registering Remote Control Codes for External Components

Procedure for registering remote control codes to operate external devices like DVD players.

Extended Functionality (Advanced Setup Menu)

Accessing advanced settings for unit initialization, firmware updates, and other extended functions.

Setting Speaker Impedance

How to adjust the unit's speaker impedance setting for compatibility with different speaker loads.

System Settings Recovery and Backup

How to save and restore unit settings, and initialize settings to default values.

Firmware Update

Instructions for updating the unit's firmware via USB or network for new features and fixes.

Using the HDMI Control Function

Guide to operating connected HDMI devices like TVs and players using the unit's remote control.

Enabling Audio Return Channel

How to enable the Audio Return Channel function for TV audio transmission via HDMI.

Enjoying Contents in Another Room (Multi-Zone)

How to configure and use the multi-zone audio system to play sources in different rooms.

Connecting Zone2

Steps for connecting audio and video equipment for Zone2 operation.

Controlling Unit Remotely from Another Room

How to use the REMOTE IN/OUT jacks for remote control of the unit and other components from Zone2.

Controlling Zone2

Operations for selecting input sources, adjusting volume, and using the sleep timer for Zone2.

APPENDIX

Troubleshooting

Common problems and solutions for unit malfunction and operational issues.

General Troubleshooting

Common problems and their solutions related to power, standby mode, and basic unit operation.

Troubleshooting: HDMI Issues

Common problems and solutions related to HDMI connections, including noise, picture/sound loss, and control function errors.

Troubleshooting: Tuner (FM/AM) Issues

Solutions for problems with FM/AM radio reception, tuning, and preset functions.

Troubleshooting: USB and Network Issues

Solutions for problems encountered with USB devices, PC servers, and network connectivity.

Troubleshooting: iPod™/iPhone™ Issues

Solutions for problems related to iPod/iPhone connection, recognition, and playback.

Troubleshooting: Remote Control Issues

Solutions for problems with the remote control not working or controlling external components.

Glossary: Audio Information

Definitions of various audio technologies and formats like Lipsync, Bi-amplification, and Dolby Digital.

Information on HDMI™ Signal Compatibility

Details on HDMI signal compatibility, including audio and video signal formats supported by the unit.

Specifications: Input and Output Details

Technical specifications for the unit's input and output terminals, including number and type of connections.

Specifications: Dynamic Headroom, Damping Factor, Input Levels

Technical specifications related to audio performance, including headroom, damping, and input sensitivity.

Quick Reference Guide

Items Necessary for Connection

Lists the essential accessories and external components required for initial setup and operation.

Initial Setup Procedure

Step-by-step guide for the initial connection and installation of the unit and its components.

Connecting Speakers and Subwoofer

Instructions for physically connecting speakers and subwoofers to the unit's terminals.

Connecting a TV

Instructions for connecting the unit to a TV via HDMI or analog video connections.

Connecting Playback Devices

Instructions for connecting external devices such as BD/DVD players for playback.

Connecting the Power Cable

Steps for connecting the unit to a power source using the supplied power cable.

Setting Speaker Parameters Automatically (YPAO)

Procedure for using the YPAO function to automatically optimize speaker settings for the listening environment.

Completing YPAO Setup

Final steps to save the YPAO settings and complete the automatic speaker setup process.

Basic Operations

Powering Unit On/Standby

How to switch the unit between on and standby modes using the power key.

Selecting Input Source

How to select the desired input source to listen to audio or view video from connected devices.

Selecting a Scene

How to switch between preset scenes, which include input sources and sound field programs.

Adjusting Volume Level

How to adjust the unit's volume level using the volume controls on the unit or remote.

Muting Sound

How to mute the audio output temporarily using the MUTE button.

Selecting Sound Programs and Decoders

Guide to choosing sound programs and decoders for different playback scenarios and desired audio effects.

Turning on Compressed Music Enhancer

How to activate the Compressed Music Enhancer to improve sound quality of compressed audio.

IMPORTANT SAFETY INSTRUCTIONS

Read Before Operating Unit

Critical instructions to read carefully before operating the unit to ensure safe and optimal performance.

Notes on Remote Controls and Batteries

Important notes regarding the proper use, handling, and maintenance of the remote control and its batteries.

FCC Information (for US customers)

Statement regarding FCC compliance and product usage guidelines for US customers.

COMPLIANCE INFORMATION STATEMENT