Yamaha RX-A2000 - Setting Sound Program Parameters (Sound Program Menu); Editing Sound Programs

SETUP
En 105
Sound effects can be adjusted from the Sound Program menu.
Editing sound programs
Adjust sound field elements (sound program parameters)
to achieve sound effects suited to the acoustics of audio/
video sources or rooms if you are not satisfied with the
results achieved with default sound program settings.
Follow the procedure described below to adjust sound
program parameters.
1
Press hON SCREEN.
2
Press iCursor B / C to select “Sound
Program” and press iENTER.
3
Use iCursor D / E to select a sound
program and press iCursor B.
4
Use iCursor B / C to select a parameter
and press iENTER.
5
Use iCursor B / C / D / E to adjust the
parameter and press iRETURN. J1
6
Press hON SCREEN to close the Sound
Program menu.
Setting sound program parameters (Sound Program menu)
RETURN
ON SCREEN
ENTER
SOU
R
C
E
R
ECEIVE
R
AV
AU
DI
O
4
3
1
2
7
5
6
V
-A
UX
4
3
1
2
US
B
MU
LTI
N
ET
P
H
O
N
O
TUNER
D
OC
K
S
IRI
US
[
A
]
i
h
Sound programs
Sound program parameters
Settings
When there are multiple parameters in the selected
sound program, repeat steps 4 and 5 to adjust other
parameters.
■ To initialize sound program parameters
To set the parameters of the sound program back to
their default settings, use iCursor B / C repeatedly
to select “Reset” in step 4 and press iENTER.
When the following message is displayed, select
“OK” and press iENTER to initialize.
To cancel initializing, select “CANCEL” and press
iENTER when the message above is displayed.
J
1 : An asterisk (*) appears on the left of the sound field parameter
name displayed on the TV when you change the parameter from
its default setting.