Yamaha RX-A770 User Manual

RX-A770
1
Choose from the following 2 methods to update to the latest firmware.
Click here for
Firmware Update Through the Internet
(Connection to the Internet is required)
Click here for
Firmware Update by USB
(A USB thumb drive is required)
In case of error, see the
Troubleshooting
section
IMPORTANT NOTICE
Do not attempt to update your Yamaha receiver using any other data file except those provided directly from the
Yamaha website or through your network connection.
Follow the instructions carefully and do not attempt any other procedures not specified in the instructions provided by
Yamaha.
Improperly updated products may cause improper operation, and any parts or service required to restore proper
operation will not be covered under the Yamaha Limited Warranty.
FIRMWARE UPDATING PROCEDURE

Yamaha RX-A770 Specifications

General

Channels	7.2
Power Output (8 ohms, 20 Hz-20 kHz, 0.06% THD, 2-ch driven)	95 W
HDMI Outputs	2
HDMI Pass-through	Yes
HDCP	2.2
AirPlay	Yes
Bluetooth	Yes
Audio Return Channel	Yes
HDMI CEC	Yes
Phono Input	Yes
Component Video Input/Output	2 in / 1 out
Preout	7.2-channel
Headphone Output	Yes
Tuner Section	AM/FM
Rated Output Power (20Hz-20kHz, 2ch driven)	95 W (8 ohms, 0.06% THD)
Maximum Effective Output Power (1kHz, 1ch driven)	160 W (8 ohms, 10% THD)
HDMI Inputs	8
Audio Formats Supported	Dolby TrueHD, DTS-HD Master Audio
Network Connectivity	Ethernet, Wi-Fi
Streaming Services	Spotify, Pandora
Digital Audio Input/Output: Optical	2
Digital Audio Input/Output: Coaxial	2
Analog Audio Input/Output	4 in / 0 out
Composite Video Input/Output	3 in / 1 out