Yamaha RX-A710BL User Manual

Check that the following accessories are supplied with this product.
You need to separately prepare the following cables to build the system based on this
document.
■ Speaker cables (depending on the number of speakers)
■ HDMI cable (x 2)
■ Audio pin cable (x 1)
■ Digital optical cable (x 1) (unnecessary if your TV supports ARC)
1 Preparations
Accessories
Cables necessary for connections
■■
■
■
■
■
■ ■
■
■
Remote control
YPAO microphone
Batteries (AAA, R03, UM-4) (x 2)
VIDEO AUX input cover
Easy Setup Guide
(this document)
Safety BrochureCD-ROM
(Owner’s Manual)
AM antenna
Insert into the remote control in the correct polarity (+/-).
FM antenna Power cable
* The figure of
the supplied power
cable differs depending on regions.
* The figure of
the supplied
FM antenna
differs depending on regions.
Easy Setup Guide
English for U.S.A.
AV Receiver
This document explains how to set up a 5.1- or 7.1-channel
system and play back surround sound of a BD/DVD on this unit.
For more information, refer to “Owner’s Manual” on the supplied
CD-ROM.
A PDF format of this guide and “Owner’s Manual” can be downloaded
from the following website.
http://download.yamaha.com/

Yamaha RX-A710BL Specifications

General

Channels	7.2
HDMI Inputs	6
HDMI Outputs	1
4K Pass-Through	No
3D Pass-Through	Yes
Component Video Inputs	2
Component Video Outputs	1
Composite Video Inputs	4
Composite Video Outputs	1
Digital Audio Inputs (Optical)	2
Digital Audio Inputs (Coaxial)	2
Phono Input	Yes
Internet Radio	Yes
Audio Formats Supported	Dolby TrueHD, DTS-HD Master Audio
Network Connectivity	Ethernet
Streaming Services	Spotify, Pandora, AirPlay
Zone Audio Output	Zone 2
Frequency Response	10 Hz - 100 kHz
Inputs	HDMI, Component Video, Composite Video, Digital Audio (Optical/Coaxial), Analog Audio
Outputs	HDMI, Component Video, Composite Video
Video Features	3D Pass-Through
Network Features	DLNA

Summary

Preparations

Accessories

Lists and illustrates accessories supplied with the AV receiver, including remote control, batteries, and antennas.

Cables necessary for connections

Lists essential cables that need to be prepared separately for system setup, such as speaker and HDMI cables.

Placing the speakers

5.1-channel system

Illustrates the recommended placement of front, center, surround speakers, and subwoofer for a 5.1-channel system.

7.1-channel system

Shows the optimal arrangement for front, center, surround, and surround back speakers in a 7.1-channel setup.

Connecting the speakers/subwoofer

Connecting speaker cables

Provides a step-by-step guide on how to prepare and connect speaker cables to the unit's terminals.

Using a banana plug

Details the method for connecting speaker cables using banana plugs for a secure and easy connection.

Connecting the external devices

Connecting AV Sources and TV

Details connecting BD/DVD players and TVs using HDMI and optical cables for audio and video signals.

Optimizing the speaker settings automatically (YPAO)

Preparing for YPAO

Instructions on preparing the subwoofer volume and crossover settings before initiating the YPAO measurement process.

Listening position

Guidance on placing the YPAO microphone at the correct ear height in the listening position for accurate room calibration.

Saving YPAO Results

Steps to save the automatically optimized speaker settings after the YPAO measurement is completed.

Troubleshooting 'W-1: Out of Phase'

Procedures to check speaker wiring and connections when the 'W-1: Out of Phase' warning message appears.

Playing back a BD/DVD

Selecting Input Source and Playback

Guides the user on selecting the HDMI input and starting playback from a BD/DVD player for surround sound.

Adjusting Volume

Instructions on how to use the remote control's volume buttons to adjust the playback sound level.