To Next PageTo Next PageWhat to do if there is no sound from my Yamaha RX-S602 Stereo Receiver?
If you're not getting any sound from your Yamaha Stereo Receiver, ensure the correct input source is selected using the input selection keys.
Why is there no sound coming from a specific speaker on my Yamaha RX-S602?
If you can't hear sound from a specific speaker connected to your Yamaha Stereo Receiver, it could be due to several reasons: * The playback source might not contain a signal for that channel. * The selected sound program/decoder might not utilize that speaker. * The audio output for that speaker might be disabled. Perform YPAO to solve this problem.
Why is there no sound coming from the subwoofer on my Yamaha Stereo Receiver?
If you're not getting any sound from the subwoofer connected to your Yamaha Stereo Receiver, it could be that the playback source doesn't contain LFE or low-frequency signals. In this case, enable the Extra Bass function using the BASS key. Also, make sure that you performed YPAO.
Why does my Yamaha RX-S602 Stereo Receiver turn off immediately?
If your Yamaha Stereo Receiver's power turns off immediately and goes into standby mode, it might be due to a shorted speaker cable. Twist the bare wires of each speaker cable firmly and reconnect them to both the unit and the speakers.
Why no video from device connected to Yamaha RX-S602 Stereo Receiver with HDMI?
If you're not getting any video when using HDMI with your Yamaha Stereo Receiver, it could be due to the input video signal (resolution) not being supported by the unit or the TV might not support HDCP (High-bandwidth Digital Content Protection). Refer to the instruction manuals for the TV and check the TV’s specifications. If you want to play back contents that require HDCP 2.2-compatible devices, both the TV and playback device must support HDCP 2.2.
Why is there no video on my Yamaha Stereo Receiver?
If you're not getting any video on your Yamaha Stereo Receiver, make sure the correct input source is selected on both the unit and the TV. Switch the TV input to display the video from the unit.
How to fix connection settings on MusicCast CONTROLLER for Yamaha Stereo Receiver?
If you're experiencing issues making connection settings on the MusicCast CONTROLLER with your Yamaha Stereo Receiver, there might be a few reasons: * Ensure your mobile device is connected to your home's wireless router. * Give the app some time to detect the unit, ensuring your mobile device doesn't go into sleep mode. * Check the firewall settings and MAC address filter of your wireless router, as they might be restricting network access.
What to do if my Yamaha RX-S602 is not reacting?
If your Yamaha Stereo Receiver is unresponsive, the internal microcomputer may be frozen due to an external electric shock or a power supply voltage drop. To resolve this, hold down the 'z' button on the unit's front panel for more than 15 seconds to initialize and reboot it. If the issue continues, disconnect the power cable from the AC wall outlet and plug it back in.
General| AirPlay | Yes |
|---|---|
| Display | - |
| HDCP version | 2.2 |
| Apple docking | No |
| Product color | White |
| Audio decoders | DTS-HD Master Audio, Dolby Digital Plus, Dolby TrueHD |
| Volume control | Rotary |
| Bluetooth range | 10 m |
| DSP programs quantity | 17 |
| Supported video modes | 2160p |
| Power consumption (standby) | 0.1 W |
| AM band range | 530 - 1710 kHz |
| FM band range | 87.5 - 108 MHz |
| Supported radio bands | AM, FM |
| Bluetooth version | 4.2 |
| Bluetooth profiles | A2DP, AVRCP |
| Audio formats supported | AAC, AIFF, ALAC, FLAC, MP3, WAV, WMA |
| Video formats supported | MPEG4 |
| AM antenna ports quantity | 1 |
| Speakers connectivity type | Clamp terminals |
| HDMI in | 4 |
| Composite video in | 3 |
| Digital audio coaxial in | 2 |
| Receiver type | Surround |
| Audio output channels | 5.1 channels |
| Dynamic power per channel (2 Ohm) | 160 W |
| Dynamic power per channel (4 Ohm) | 140 W |
| Dynamic power per channel (6 Ohm) | 110 W |
| Dynamic power per channel (8 Ohm) | 90 W |
| Power output per channel (1KHz@6 Ohm) | 95 W |
| Power output per channel (20-20KHz@8 Ohm) | - W |
Weight and Dimensions| Depth | 328 mm |
|---|---|
| Width | 435 mm |
| Height | 111 mm |
| Weight | 7800 g |
Explains symbols used for warnings and alerts in the manual.
Guidelines for safe use and handling of the power cord and plug to prevent shock or fire.
Instructions against disassembling the unit and precautions for water exposure.
Advice on preventing fires and proper cleaning methods using safe materials.
Safety guidelines for handling and disposing of batteries to prevent leaks or explosions.
Guidelines for safe unit installation and preventing hearing damage from high volume.
Diagram and advice for optimal placement of surround sound speakers in a listening environment.
Important safety and technical steps for correctly connecting speaker cables to prevent damage.
Instructions on setting the voltage selector and plugging in the power cable for the first time.
Important notes and precautions regarding the YPAO automatic speaker calibration process and test tones.
Solutions for issues related to the unit not turning on or not responding to commands.
Troubleshooting steps for audio problems, including no sound or issues with specific speakers.
Solutions for subwoofer audio issues and problems with no video from HDMI connections.
Troubleshooting steps for problems encountered when connecting to the MusicCast network.
