Yamaha RX-V367 Quick Reference Guide

PUSH
- 1 -
for North America
Quick Reference Guide
English
Preparing the remote control
1
Take off the battery compartment cover.
2
Insert the two supplied AAA batteries into the battery case, following the polarity
markings.
3
Snap the battery compartment cover back into place.
Accessories
■
Items necessary for connection
■
The following accessories are supplied with this product.
Speakers
External components Cable
Cables for connecting external components•
(may differ depending on the devices you are connecting)
Speaker cables•
(a quantity to match the number of speakers you are connecting)
Audio pin cable•
(for subwoofer)
Remote control
Front speaker
TV
Ex. Ex. Ex. Ex.
Playback device such as BD
(Blu-ray Disc)/DVD players
Batteries (2) (AAA, R03, UM-4)
Center speaker
AM loop antenna
Surround speaker
Indoor FM antenna VIDEO AUX input cover
Active subwoofer
Use speakers with an impedance of at least 6Ω. •
If you are using a CRT TV, we recommend that you use magnetically shielded speakers.•
Prepare at least two speakers (for front). The priority of the other speakers is as follows:•
1 Two surround speakers
2 One center speaker
3
1
2
3

Yamaha RX-V367 Specifications

General

Audio output channels	5.1 channels
Signal-to-Noise Ratio (SNR)	98 dB
Total Harmonic Distortion (THD)	0.06 %
HDMI	Yes
Output power	600 W
Dimensions (WxDxH)	435 x 315 x 151 mm
HDMI ports quantity	5
Output power description	5 x 120 W/ch
Digital audio optical in	2
Bluetooth	No
Product color	Titanium
Power consumption (standby)	0.5 W
Power consumption (typical)	250 W

Weight and Dimensions

Weight	7500 g