EasyManuals Logo

Yamaha RX V3900 - AV Network Receiver User Manual

Yamaha RX V3900 - AV Network Receiver
6 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Firmware Update Procedure for RX-V3900
Page.1 of 6
February, 2010
Subject: RX-V3900 Firmware Update ver. 1.11
Yamaha is pleased to offer this firmware update to ensure the best possible
performance for your Yamaha RX-V3900 AV Receiver.
This firmware improves HDMI standby through function.
The following pages contain the firmware update instructions for the RX-V3900.
You can easily update the latest firmware either by using an USB thumb drive, or
by connecting the receiver to the Internet. In order to properly execute the update,
read all instructions carefully. The following links will also lead you directly to the
beginning of each individual section of the instructions.
9 Click here to confirm the current firmware version before the update.
9 Click here for the firmware update by USB thumb drive.
(Update by Network is recommended if your receiver is connected to the internet)
9 Click here for the firmware update by Network.
9 Click here for the firmware version confirmation after update.
9 Click here for troubleshooting.
< IMPORTANT NOTICE >
Do not attempt to update your Yamaha receiver using any other data file except those provided
directly from the Yamaha website or through your network connection.
Follow the instructions carefully and do not attempt any other procedures not specified in the
instructions provided by Yamaha.
Improperly updated products may cause improper operation, and any parts or service required
to restore proper operation will not be covered under the Yamaha Limited Warranty.

Other manuals for Yamaha RX V3900 - AV Network Receiver

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yamaha RX V3900 - AV Network Receiver and is the answer not in the manual?

Yamaha RX V3900 - AV Network Receiver Specifications

General IconGeneral
TypeAV Network Receiver
Amplifier TypeDiscrete
Channels7.1
Power Output (Detailed)140W x 7 (8 ohms, 20 Hz-20 kHz, 0.04% THD)
Total Harmonic Distortion (THD)0.04%
Total Harmonic Distortion (THD) Condition20 Hz - 20 kHz
Input Sensitivity/Impedance200 mV/47 k-ohms
Signal-to-Noise Ratio100 dB
HDMI Inputs4
HDMI Outputs2
Video Inputs/Outputs (Component)3/1
Audio Inputs/Outputs (Digital Coaxial)3/0
HDMI Version1.3a
Frequency Response10 Hz - 100 kHz
Video Inputs/Outputs (Composite)4 In/1 Out
HDMI FeaturesDeep Color, x.v.Color, Auto Lip-Sync
Audio Formats SupportedDolby TrueHD, DTS-HD Master Audio
Network FeaturesYes
Network FunctionsInternet Radio
USB PortYes
Dimensions (W x H x D) Alternative435mm x 182mm x 463mm
Dimensions (W x H x D) Inches17.1 x 6.6 x 15.4
Weight Alternative18.5kg
Weight (lbs)63.3
Power Output140W (8 ohms, 20 Hz - 20 kHz, 0.04% THD)

Related product manuals