Need help?Do you have a question about the Yamaha V665 - RX AV Receiver and is the answer not in the manual?
General| Channels | 7.2 |
|---|---|
| HDMI Inputs | 4 |
| HDMI Outputs | 1 |
| Signal-To-Noise Ratio | 100 dB |
| HDMI Switching | Yes |
| Input Sensitivity | 200 mV |
| Audio D/A Converter | 192kHz/24-bit |
| DSP Presets | 17 |
| Tuner Presets | 40 |
| Audio Formats Supported | Dolby Digital, Dolby Digital Plus, Dolby TrueHD, DTS, DTS-HD Master Audio, DTS-ES Matrix |
| Video Formats Supported | 1080p |
| Response Bandwidth | 10 - 100000 Hz |
| Input Impedance | 47 kOhm |
| HDMI Pass-Through | Yes |
| Frequency Response | 10 - 100000 Hz |
| Inputs | HDMI x 4, digital audio (coaxial) x 2 |
| Outputs | HDMI x 1, component video x 1 |
| Audio Decoding | Dolby Digital, Dolby Digital Plus, Dolby TrueHD, DTS, DTS-HD Master Audio |
Explains standard warning symbols used in the manual for safety.
Provides guidelines for proper grounding of CATV system installations.
Details FCC regulations for digital devices and potential interference issues.
Lists critical precautions for safe unit operation and placement to prevent damage.
Specific safety advice for Canadian customers regarding electrical connections.
Instruction to record the unit's serial number for future reference.
Details the unit's 7-channel power amplifier and speaker output terminal specifications.
Lists and categorizes all input and output connection terminals on the unit.
Describes proprietary technologies for creating sound fields like CINEMA DSP.
Lists the various digital audio decoders supported by the unit.
Covers radio tuners, HDMI, and DOCK terminal capabilities.
Highlights the YPAO system for automatic speaker optimization.
Lists other features such as D/A converter and multi-zone function.
Explains symbols and notes used throughout the manual for clarity.
Lists trademarks and licensing details for audio technologies.
Itemizes all accessories included with the AV receiver.
Describes the function of each button on the front panel for operation.
Details the purpose of each jack on the front panel for connections.
Explains the information shown on the front panel display and indicator lights.
Identifies terminals for satellite/XM tuners and iPod/Bluetooth docks.
Details terminals for video output, HDMI input/output, and antennas.
Lists terminals for speaker connections, analog audio, and Zone 2 audio output.
Identifies terminals for remote control signals and power input.
Details AV input jacks, AV output, and multi-channel audio input terminals.
Explains indicators for SIRIUS, XM, HDMI, and Tuner status.
Describes indicators for CINEMA DSP, Zone 2, and Sleep Timer.
Explains the volume level and mute status indicators.
Explains multi-information display and speaker output indicators.
Covers primary buttons like input selection, tuning, sound modes, SCENE, and navigation.
Details keys for operating external devices via remote.
Lists necessary components like speakers, players, and cables for setup.
Guides on speaker placement and connection to the unit.
Instructions for connecting external devices like TVs and DVD players.
Procedure for connecting the power cable and turning on the unit.
Initial steps for selecting a source and beginning playback.
Step-by-step guide for inserting batteries into the remote control.
Notes on aiming the remote and operating it correctly.
Illustrates recommended speaker positions for 7.1, 6.1, and 5.1 channel setups.
Explains the role of each speaker type (Front, Center, Surround, Subwoofer).
Details connecting presence speakers to EXTRA SP terminals.
Maps speaker types to specific terminals for different channel configurations.
Instructions for connecting speaker wires to standard terminals.
Guides for connecting extra speakers and using banana plugs.
Details how to set up speakers for bi-amplification.
Explains analog, coaxial, and optical audio jacks.
Details video, component video, and HDMI jacks.
Guides for connecting different types of video monitors.
Steps to route TV audio through the receiver.
Table showing connections for common media devices.
How to connect players for discrete multi-channel audio.
Instructions for connecting external amplifiers to PRE OUT terminals.
Specifics for connecting various audio players.
Details for connecting players with multi-channel output.
Further information on connecting external amplifiers.
How to connect for remote signal transmission.
Connecting devices via front panel AUX inputs.
Setup for iPod universal dock and Bluetooth receiver.
Instructions for connecting supplied antennas.
How to connect the unit to AC power.
Procedure for turning the unit on and off for the first time.
Important warnings and notes before performing YPAO auto setup.
Step-by-step guide for the automatic YPAO calibration process.
Procedures for resolving error messages during YPAO setup.
Guidance on responding to warning messages after YPAO measurement.
Steps for selecting input sources and playing back content.
How to use the SCENE function for input/sound mode switching.
Registering remote control codes for external devices with SCENE.
How to temporarily mute the audio output.
Fine-tuning audio frequency balance.
Using Pure Direct mode for high-fidelity audio.
Connecting and using headphones with the unit.
How to view details about the current audio/video input signal.
Customizing what is shown on the front panel display.
Setting the unit to turn off automatically.
How to select sound field programs using front panel buttons.
How to select sound field programs using the remote.
Explains program types for movies, music, and stereo.
Using the unit without sound field effects.
Enjoying surround sound without rear speakers.
Using sound field programs with headphones.
Activating and using CINEMA DSP 3D mode.
Tuning to stations by frequency or auto-search.
Registering and selecting stations using presets.
Steps for automatically registering FM stations.
Steps for manually registering stations.
How to select a previously registered station.
Steps to remove registered stations.
General information about satellite radio services.
Connecting the XM Mini-Tuner Home Dock.
Steps to subscribe and activate XM Radio.
Locating the unique XM Radio ID for activation.
How to browse all available XM channels.
How to search for channels by category.
How to tune directly to a channel using its number.
Storing frequently accessed XM channels.
Retrieving stored XM channels.
Removing stored XM channels.
Viewing XM channel details on the TV screen.
Viewing XM channel details on the unit's display.
Hardware connection for the SIRIUS tuner.
Steps to activate the SIRIUS Satellite Radio service.
How to find the unique Sirius ID for activation.
Browsing all available SIRIUS channels.
Searching SIRIUS channels by category.
Tuning directly to SIRIUS channels by number.
Storing frequently accessed SIRIUS channels.
Retrieving stored SIRIUS channels.
Removing stored SIRIUS channels.
Procedure to set PIN and lock specific SIRIUS channels.
How to access channels that have been locked.
Viewing SIRIUS channel details on the TV screen.
Viewing SIRIUS channel details on the unit's display.
Overview of iPod control methods via dock.
Controlling iPod using the video monitor menu.
Controlling iPod without the video menu.
Setting shuffle and repeat playback styles for iPod music.
Steps to pair a Bluetooth component with the receiver.
How to play audio from a connected Bluetooth device.
Explains the OPTION menu and its structure.
Adjusting volume levels for individual input sources.
Configuring audio decoder modes for input sources.
Adjusting extended surround effects for audio.
Viewing details about audio and video signals.
Setting FM reception mode (Stereo/Mono).
Managing auto presets and clearing presets for tuners.
Setting shuffle and repeat modes for iPod.
Connecting, disconnecting, and pairing Bluetooth devices.
Configuring video output during multi-channel playback.
Choosing surround decoders to use with sound field programs.
Adjusting parameters for sound field programs.
Explains parameters like DSP Level for sound fields.
Adjusting the vertical position of dialogue in movies.
Configuring CINEMA DSP 3D and room size simulation.
Adjusting characteristics of early sound reflections.
Defining attenuation characteristics of early-reflected sound.
Adjusting reverberant sound parameters like Rev. Time and Delay.
Settings unique to certain sound field programs (e.g., 2ch Stereo, 7ch Stereo).
Customizing decoder effects like Panorama and Dimension.
Covers speaker configuration and sound output settings.
Settings for HDMI, display, and input sources.
Adjusting volume levels and Zone 2 settings.
Sound field parameters and settings protection.
Detailed options for Speaker Setup, including Auto and Manual.
Procedures for automatic and manual speaker calibration.
Setting speaker size and configuration.
Configuring low-frequency output and front speaker parameters.
Adjusting settings for center and surround speakers.
Configuring surround back speaker parameters.
Adjusting crossover frequency, subwoofer phase, and speaker levels.
Setting speaker distance, equalizer, and test tone features.
Setting audio delay for video synchronization.
Configuring HDMI auto and manual delay for lipsync.
Configuring HDMI standby through and audio output.
Adjusting HDMI output resolution and aspect ratio.
Adjusting dimmer, scroll mode, and OSD position.
Setting volume limits, initial volume, and DRC.
Renaming input sources and setting Zone 2 volume limits.
Sound field parameters and settings protection.
Steps for connecting and configuring Zone 2.
Important safety warning for Zone 2 speaker connections.
How to use internal or external amps for Zone 2 audio.
Using front panel controls to operate Zone 2.
Using the remote control to manage Zone 2 functions.
Procedure to set remote control codes for external devices.
How to reset all previously set remote control codes.
Options for initializing DSP, Video, or all settings.
How to assign a remote control ID to prevent interference.
Lists common problems and their solutions.
Solutions for problems with iPod recognition and playback.
Troubleshooting for Bluetooth pairing and connection problems.
Addresses error messages before YPAO measurement starts.
Solutions for errors occurring during YPAO measurement.
Definitions for Lip Sync, Bi-amplification, Component, Composite video.
Explains Dolby Digital, EX, Plus, Pro Logic II, IIx.
Definitions for DSD, DTS 96/24, DTS Digital Surround, DTS Express.
Explains DTS-HD High Resolution Audio and Master Audio.
Explains HDMI, LFE channel, and Neural Surround technology.
Definitions for Neo:6, PCM audio, and sampling frequency.
Lists compatible audio signal types and formats for HDMI.
Details the video resolutions supported via HDMI.
Detailed technical specs for the audio components.
Technical specifications for video and tuner sections.
Overall specifications like power supply and dimensions.
Explains direct sound, reflections, and reverberations.
Explains CINEMA DSP, DSP 3D, SILENT CINEMA, Virtual DSP.
How the Compressed Music Enhancer improves audio quality.
List of remote control codes for TV brands.
Explains the HDMI control function and its capabilities.
Step-by-step guide to enable and use HDMI control.
How to connect external components for audio output.
Linking video inputs to audio inputs for specific connections.
To Next Page