To Next PageTo Next Page
Need help?Do you have a question about the Yamaha RX-V592 and is the answer not in the manual?
General| Power Output | 100 W per channel (8 ohms) |
|---|---|
| Frequency Response | 10 Hz - 100 kHz |
| Weight | 8.0 kg |
| Speaker load impedance | 8 ohms |
| THD (20Hz-20kHz, 70W) | 0.04% |
| Signal-to-Noise Ratio (CD, IHF-A) | 96dB |
| Total Harmonic Distortion (THD) | 0.05% |
| Signal-to-Noise Ratio | 96dB (CD) |
| Tuning range | FM: 87.5-108MHz, AM: 530-1710kHz |
| Damping factor | 100 |
| Input sensitivity | 150 mV (Line) |
| Channel separation | 50 dB |
| Video Connections | composite |
| Input Sensitivity/Impedance | 150 mV / 47 k ohm |
| FM Sensitivity | 1.0uV (IHF) |
| Dimensions (W x H x D) | 435 x 151 x 386 mm |
Covers essential precautions for safe operation, installation, and maintenance.
Details speaker power, DSP, and Dolby Pro Logic Surround features.
Crucial steps before operation: installation, cleaning, volume, and troubleshooting advice.
Instructions for battery replacement, optimal remote placement, and interference.
Explains DSP technology and Dolby Pro Logic Surround for immersive audio.
Explains speaker setups and provides guidelines for positioning speakers.
General instructions and diagram for connecting various devices.
Guidelines on speaker impedance matching and specific connection scenarios.
Details for custom installation systems using remote control terminals.
Details on subwoofer output and how to set the impedance selector.
Instructions for connecting antennas and grounding for safety.
Detailed identification of controls on the front panels of both models.
Explains power, input selection, DSP, volume, and headphone controls.
Details speaker selection, bass extension, tone controls, and balance adjustment.
Explains the information shown on the unit's display panel.
Describes indicators for memory, tuning, tape monitor, stereo, signal level, and DSP.
Steps for setting volume, power, speakers, and tone controls before adjustment.
Using the test tone generator and adjusting main speaker balance.
Steps to select a source, turn on power, play, and adjust volume.
How to listen to sources decoded by Dolby Digital (AC-3).
Procedure for recording audio sources to tape or MD recorders.
How to select speaker systems A or B.
Adjusting balance, bass, treble, and using the tone bypass function.
How to use automatic search and manual tuning for FM/AM stations.
Step-by-step process for storing and accessing favorite radio stations.
Information on how memory data is retained and restored.
Description of various DSP programs and their features.
How to use the remote with the lid open for basic functions.
Identification of keys and their intended functions on the remote.
Explains keys for controlling tape decks, CD/LD players, and tuners.
Covers DSP selection, test key, sleep timer, system power, and other functions.
How keys with memory areas A, B, and C can store multiple functions.
Operating components with the remote lid closed.
How to configure the MACRO switch for macro function execution.
How to clear specific or all learned functions and macros.
Solutions for common problems like no sound, poor reception, or noise.
Detailed electrical and performance specifications for the audio section.
Specifications for video signal handling, FM/AM tuning, and general unit details.
