Yamaha Soavo-900M - User Manual

1 En
English
Français
Deutsch
Español
Read this before using the speaker.
• To assure the finest performance, please read this
manual carefully. Keep it in a safe place for future
reference.
• Install the speaker in a cool, dry, clean place – away
from windows, heat sources, sources of excessive
vibration, dust, moisture and cold. Avoid sources of
humming (transformers, motors). To prevent fire or
electrical shock, do not expose the speaker to rain or
water.
• To prevent the enclosure from warping or discoloring, do
not place the speaker where it will be exposed to direct
sunlight or excessive humidity.
• Do not place the following objects on the speaker:
Glass, china, etc.
If glass etc. falls by vibrations and breaks, it may cause
personal injury.
A burning candle etc.
If the candle falls by vibrations, it may cause fire and
personal injury.
A vessel with water in it
If the vessel falls by vibrations and water spills, it may
cause damage to the speaker, and/or you may get an
electric shock.
• Do not place the speaker where foreign objects such as
water drips might fall. It might cause a fire, damage to
the speaker, and/or personal injury.
PRECAUTIONS
Soavo-900M
Speaker System
OWNER’S MANUAL
URGT
Thank you for selecting this YAMAHA Soavo-900M speaker system.
• Do not attempt to clean the speaker with chemical
solvents as this might damage the finish. Use a clean,
dry cloth.
• Do not attempt to modify or fix the speaker. Contact
qualified YAMAHA service personnel when any service
is needed. The cabinet should never be opened for any
reasons.
• Secure placement or installation is the owner’s
responsibility.
YAMAHA shall not be liable for any accident caused
by improper placement or installation of the speaker.
• Do not place the speaker where it is liable to be knocked
over or struck by falling objects. Stable placement will
also ensure better sound performance.
• Placing the speaker on the same shelf or rack as the
turntable can result in feedback.
• Never put a hand or a foreign object into the port located
on the rear of the speaker as this might cause personal
injury and/or damage to the speaker.
• When moving the speaker, do not hold the port as it
might cause personal injury and/or damage to the
speaker.
• Any time you note distortion, reduce the volume control
on your amplifier to a lower setting. Never allow your
amplifier to be driven into “clipping”. Otherwise the
speaker may be damaged.
• When using an amplifier with a rated output power
higher than the nominal input power of the speaker, care
should be taken never to exceed the speaker’s
maximum input.
01_EN_Soavo-900M_URGT.p65 7/28/06, 4:05 PM1

Summary

PRECAUTIONS

PLACING THE SPEAKERS

Using as 2 ch stereo speakers

Guidance on positioning speakers for optimal stereo imaging by angling them towards listeners.

Using as front speakers in a multi channel system

Instructions for positioning front speakers relative to the TV for multi-channel audio.

Using as presence or surround speakers

Advice on placing presence or surround speakers on shelves or other surfaces.

When hanging on a wall

Instructions and warnings for mounting the speaker on a wall using brackets and safety wire.

CONNECTION TO YOUR AMPLIFIER

When using a banana plug

Step-by-step guide for connecting speaker cables using banana plugs to the amplifier terminals.

ATTACHING THE FRONT COVER

SPECIFICATIONS

Taking care of the speaker

Yamaha Soavo-900M Specifications

Speaker System

type	2-way bass reflex speaker system
magnetic shielding type	Yes
driver	13 cm (5") cone woofer, 3 cm (1") aluminum dome tweeter

Electrical Specifications

impedance	6 Ω
nominal input power	30 W
maximum input power	120 W

Performance

frequency response	56 Hz to 50 kHz (– 10 dB) to 100 kHz (– 30 dB)
sensitivity	87 dB/2.83 V/m
crossover frequency	3 kHz

Weight and Dimensions

dimensions	220 x 349 x 237 mm
weight	6.0 kg