Instrument operation
46
TIP:
Once the reverse RPM control is activated,
pushing the plus side of the no-wake
mode/cruise assist switch will increase the
available engine speed by approximately 500
rpm in 3 stages up to a maximum of 6000
rpm, and pushing the minus side will de-
crease the available engine speed. However,
the adjustment is limited to these 3 incre-
ments.
To deactivate the reverse RPM control:
Operate the remote control lever to decrease
the engine speed to less than 4500 rpm. The
LCD will return to the normal display and the
reverse RPM control will be deactivated.
Switch circuit breakers
The electrical circuit for each switch is protect-
ed by a circuit breaker. If the button under a
switch pops out, push it back in with your fin-
ger. If it pops out again, ask a Yamaha Boat
Dealer to inspect the electrical system.
1 Switch circuit breaker
1 Switch circuit breaker
5000 RPM
Cruise
BLOWERBILGE
1
CTSY
LIGHTS
NAV/ANC
HORN
1
SportsBoat.book Page 46 Monday, October 31, 2011 4:12 PM
To Next Page
Loading...
Need help?
General
