Yamaha TRS-MS05 - User Manual

Other manuals for Yamaha TRS-MS05

Mode D'Emploi12 pages

Questions and Answers

B
baileysarahAug 11, 2025
Why do my Yamaha Speakers have no sound?
- V
  Vanessa WeberAug 11, 2025
  If your Yamaha Speakers have no sound, several factors could be the cause: * Ensure the AC power cord is firmly plugged into the wall outlet. * Verify the main power switch on the subwoofer is set to ON. * Check that all connections are secure, and try using a different cable. * Increase the volume by turning the instrument’s [MASTER VOLUME] control to the right. * Adjust the subwoofer volume by turning the [MASTER VOLUME] control to the right. * Fine-tune the bass by turning the subwoofer [BASS] control to the right, ideally setting it to the midway position.
S
Samantha KellerAug 18, 2025
What to do if my Yamaha TRS-MS05 sound distorted?
- A
  April TannerAug 18, 2025
  If the sound from your Yamaha Speakers is distorted: * Reduce the volume on the instrument, as the input signal level may be too high. * Decrease the subwoofer [BASS] control volume by turning it counter-clockwise.
K
Kathy DuffyAug 25, 2025
Why do my Yamaha TRS-MS05 make a popping sound when turned on or off?
- K
  Kristine GrahamAug 26, 2025
  If your Yamaha Speakers produce a “pop” sound when turned on or off, the instrument’s power may be turned on before the subwoofer’s. To resolve this, first turn the subwoofer’s power ON, and then turn the instrument’s power ON.
J
john03Sep 1, 2025
How to fix noise from Yamaha Speakers?
- S
  Sean CantrellSep 2, 2025
  If you are experiencing noise from your Yamaha Speakers, it might be due to faulty or incomplete connections. Ensure all connections are secure, or try using a different cable.