For your safety – pre-operation checks
5-2
5
Brake lever
• Make sure that operation is smooth.
• Lubricate lever pivoting point if necessary.
7-24
Sidestand
• Make sure that operation is smooth.
• Lubricate pivot if necessary.
7-25
Chassis fasteners
• Make sure that all nuts, bolts and screws are properly
tightened.
• Tighten if necessary.
—
Engine stop switch • Check operation. 4-1
ITEM CHECKS PAGE
UB5186E0.book Page 2 Wednesday, April 22, 2020 9:11 AM
To Next Page