Yamaha TT-R110E 2021 - Removing and Installing Panels

Periodic maintenance and adjustment
7-6
7
EAU18773
Removing and installing pan-
els
The panels shown need to be removed
to perform some of the maintenance
jobs described in this chapter. Refer to
this section each time a panel needs to
be removed and installed.
EAU56170
Panel A
To remove the panel
1. Remove the seat. (See page 4-8.)
2. Remove the bolts and the quick
fastener screws, and then take the
panel off.
To install the panel
1. Place the panel in the original po-
sition, and then install the bolts
and the quick fastener screws.
2. Install the seat.
Panel B
To remove the panel
1. Remove the seat. (See page 4-8.)
2. Remove the bolt, and then pull the
panel off as shown.
To install the panel
1. Place the panel in the original po-
sition, and then install the bolt.
2. Install the seat.
1. Panel A
1. Panel B
1
1
1. Panel A
2. Bolt
3. Quick fastener screw
1. Panel B
2. Bolt
3. Projection
3
1
2
3
3
1
2
UB5186E0.book Page 6 Wednesday, April 22, 2020 9:11 AM