Need help?Do you have a question about the Yamaha TT-R230 2020 and is the answer not in the manual?
General| Engine Type | 223cc air-cooled SOHC 4-stroke; 2 valves |
|---|---|
| Bore x Stroke | 70.0mm x 58.0mm |
| Compression Ratio | 9.5:1 |
| Ignition | CDI |
| Transmission | Constant-mesh 6-speed; multiplate wet clutch |
| Final Drive | Chain |
| Rear Suspension | Single shock; 8.7-in travel |
| Front Tire | 80/100-21 |
| Rear Tire | 100/100-18 |
| Length | 81.3 in |
| Width | 31.5 in |
| Height | 46.5 in |
| Seat Height | 34.3 in |
| Wheelbase | 54.3 in |
| Fuel Capacity | 2.1 gal |
| Front Suspension | Telescopic fork |
| Front Brake | Hydraulic disc |
| Rear Brake | Drum |
Owner responsibilities, safe riding techniques, and pre-operation checks.
Importance of protective apparel and avoiding carbon monoxide hazards.
Identification of key components on the left side of the motorcycle.
Diagram and identification of the motorcycle's controls and instruments.
Operation of ignition, engine stop, and start switches.
Function and operation of clutch lever, brake lever, and throttle grip.
Controls for fuel delivery, including tank cap, fuel cock, and choke.
Procedures for checking fuel level, engine oil, and brake system components.
Checking clutch, throttle, cables, drive chain, wheels, and tires.
Guidelines for breaking in the engine during the first 20 hours of riding.
Steps for starting and warming up a cold or warm engine.
How to shift gears and decelerate smoothly, including recommended shift points.
Overview of periodic maintenance intervals for emission control and general items.
Procedures for spark plug, engine oil, and oil filter maintenance.
Maintenance for tires, wheels, brakes, and suspension systems.
Guidance on diagnosing and resolving common engine starting and power issues.
Safe and effective methods for washing the motorcycle.
Proper procedures for storing the motorcycle for extended periods.
Recording vehicle identification numbers and model label information.
Details of the limited warranty, exclusions, and customer responsibilities.
To Next Page