Name: Yamaha TT600R
Brand: Yamaha
Rating: 4 (1 reviews)

To Next Page

To Previous Page

INSP

ADJ

3-17

ENGINE OIL REPLACEMENT

Do not put additives into the engine oil. The

latter also lubricates the clutch and additives

might cause it to slide.

WARNING

Never remove the oil tank cap when the

engine is hot. The boiling oil might spill over,

causing burns. Wait for the oil to cool to at

least 60°C (140°F) or thereabouts.

Engine oil replacement (without replacing filter

oil)

1. Warm up the engine for a few minutes.

2. Stop the engine. Place an oil pan under the

engine and remove the oil filler cap.

3. Remove the drain plug (1) and drain the

engine oil.

4. Remove two bolts (2) and O-ring of the oil

hose flange, and drain the oil from oil tank.

CAUTION:

7. Inspect:

•

All gaskets

Damaged ➔ Replace.

8. Reassemble:

•

Oil filter cover bleeder screw

•

Engine oil drain plug

•

Oil tank hose and O-ring

5. Remove the air bleed screw (3) attached to

the oil filter cover (4).

6. Wait until the oil has completely drained.

Yamaha TT600R Specifications

General

Yamaha TT600R User Manual

Questions and Answers: