Yamaha TW200 - Replacing a Turn Signal Light Bulb

6-39
PERIODIC MAINTENANCE AND MINOR REPAIR
1
2
3
4
5
6
7
8
9
ECA00065
cC
Do not overtighten the screw, oth-
erwise the lens may break.
6. Install the bulb cover, and then
connect the coupler.
7. Install the headlight unit by
installing the bolts.
8. Install the cowling.
9. Have a Yamaha dealer adjust
the headlight beam if necessary.
EAU03497
Replacing a turn signal light
bulb
1. Remove the turn signal light lens
by removing the screw.
2. Remove the defective bulb by
pushing it in and turning it coun-
terclockwise.
3. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
4. Install the lens by installing the
screw.
1. Screw
2. Bulb
3. Lens
3
1
2