To Next PageTo Next Page
Need help?Do you have a question about the Yamaha TX-480 and is the answer not in the manual?
General| Tuning Bands | FM, MW |
|---|---|
| Tuning Scale | Digital |
| Signal to Noise Ratio (AM) | 50 dB |
| FM Tuning Range | 87.5 MHz to 108 MHz |
| MW Tuning Range | 530 - 1600 kHz |
| Frequency Response | 30 - 15, 000 Hz |
| Dimensions | 435 x 85 x 287mm |
| Type | Stereo AM/FM Tuner |
| Sensitivity (AM) | 30 µV |
The unit must not be used near water, including baths, sinks, laundry tubs, or swimming pools.
Ensure proper ventilation by avoiding blockage of openings and placement away from heat sources.
Connect to correct power sources and route cords to prevent damage or pinching.
Handle unit with care, avoid liquid/object entry, clean only as recommended, and unplug when unused.
Refer to qualified personnel for any damage or servicing beyond manual instructions.
Locate outdoor antennas away from power lines and ensure proper grounding for safety.
Carefully choose installation location, avoiding direct sunlight, heat, vibration, or moisture.
Do not open the cabinet to prevent damage or electrical shock; disconnect during storms.
Always pull directly on the power plug, never the cord, when disconnecting from the wall outlet.
Use controls gently, disconnect power before moving, and clean with a dry cloth.
Refer to the 'TROUBLESHOOTING' section and keep the manual for future reference.
Modifications not approved by Yamaha may void FCC authority to use the product.
Use only high-quality shielded cables, including those supplied with the product, for connecting accessories.
Product tested for Class 'B' digital devices; compliance ensures reasonable assurance against harmful interference.
Connect antennas to designated terminals correctly for optimal reception.
Connect the tuner's output terminals to the amplifier's input terminals using the provided cord.
Perform quick automatic-search tuning when station signals are strong and clear.
Tune to desired stations manually when signals are weak or interference is present.
Store and recall station frequencies using dedicated preset buttons for quick access.
Automatically store FM stations with strong signals sequentially.
View RDS data in Program Service (PS) station name mode or Program Type (PTY) name mode.
Switch between PS mode, PTY mode, and usual mode using the FREQ/PS/PTY button.
