To Next PageTo Next PageHow to stop noise when using a mobile phone near my Yamaha Tyros2?
If you're experiencing noise when using a mobile phone close to your Yamaha Musical Instrument, it's likely due to interference. To resolve this, either turn off the mobile phone or increase the distance between the phone and the instrument.
What to do if song playback doesn't start on my Yamaha Musical Instrument?
If song playback doesn't start, consider these possibilities: * If the song has write-protection applied (“Prot. 2 Edit”), ensure the original file (“Prot.2 Orig”) is in the same folder. * For write-protected songs, verify that the original file hasn't been renamed. Rename the file with the original file name. * Write-protected songs won't play if the original file icon has been altered, so restore the original icon. * Ensure MIDI Clock is set to “INTERNAL,” not “EXTERNAL.”
Why does the Vocal Harmony effect sound distorted on my Yamaha Tyros2?
If the Vocal Harmony effect sounds distorted or out-of-tune, it might be because your microphone is picking up unwanted sounds, like the style sound from the instrument. Bass sounds are especially problematic. Try these solutions: * Sing as close to the microphone as possible. * Use a directional microphone. * Reduce the MASTER VOLUME, style volume, or song volume. * Separate the microphone from the external speakers as much as possible. * Cut the Low band using the 3 Band EQ function in the MIC SETUP display.
Why doesn't the style chord change on my Yamaha Tyros2 Musical Instrument when I play a different chord?
If the style chord isn't changing or the chord isn't recognized, make sure you're playing on the left-hand section of the keyboard. Also, check if you're using single-finger type fingering.
How to fix the error message when recording audio on my Yamaha Tyros2?
If you're getting an error message and can't record audio to the hard disk drive, it's likely fragmented. Since there's no Defrag function, you need to format the drive. First, back up your data to a computer using USB storage mode. Then, format the drive and copy the data back using USB storage mode. This copy/restore process defragments the drive.
Why is only the rhythm channel playing on my Yamaha Tyros2?
If only the rhythm channel of the style is playing, ensure that the [ACMP] is turned on.
What to do if the style doesn't start on my Yamaha Musical Instrument?
If the style doesn't start even with Synchro Start in standby, you might be playing a key in the right-hand range. To start the style with Synchro Start, play a key in the left-hand (chord) range of the keyboard.
What to do if the voice selected from the Open/Save display will not be sounded on my Yamaha Musical Instrument?
Check whether or not the selected part is turned on.
Why do certain notes sound at the wrong pitch on my Yamaha Musical Instrument?
Make sure that the scale tuning value for those notes is set to “0”.
Why can't I copy or cut an audio song on my Yamaha Musical Instrument?
If you can't copy or cut an audio song, the file name (including the file path) might be too long. Try shortening the song name or copying/pasting it to an upper folder level.
General| Control type | Buttons, Touch |
|---|---|
| MIDI-keyboard number of keys | 61 keys |
| Product color | Silver |
| Sound effects | Chorus, Equalization, Reverberation |
| Octave adjustment | Yes |
| Maximum polyphony (notes) | 128 |
| Music memory capacity (songs) | 5 |
| Display type | LCD |
| USB version | 2.0 |
| Headphone outputs | 1 |
| USB ports quantity | 3 |
| Power source type | AC |
Weight and Dimensions| Depth | 450 mm |
|---|---|
| Width | 1140 mm |
| Height | 137 mm |
| Weight | 14500 g |
