Yamaha VF200 - Inspecting Wiring and Connectors

Maintenance
89
VF200LA, VF225LA, VF250LA
VF250XA
20. Apply LOCTITE 572 to the threads of the
screws and then install the screws.
TIP:
LOCTITE 572 is used as a sealant.
21. Install the top cowling.
22. Dispose of used oil according to local
regulations.
TIP:

For more information on the disposal of
used oil, consult your Yamaha dealer.

Change the oil more often when operating
the engine under adverse conditions such
as extended trolling.
EMU29116
Inspecting wiring and connectors

Inspect that each connector is engaged
securely.

Inspect that each ground lead is properly
secured.
1. Bolt
1. Bolt
1
1
ZMU07963
1
1
1
ZMU07961
1. Screw
1
ZMU07962
6CB-9-3B-1E0.book 89 ページ ２０１７年１１月１６日 木曜日 午後５時２９分
©2019 Yamaha Motor Corporation, U.S.A.