Yamaha VF200 - Page 99

Maintenance
93
VF200LA, VF225LA, VF250LA
VF250XA
4. Remove the gear oil drain screw and
gasket.
VF200LA, VF225LA, VF250LA
VF250XA
5. Remove the oil level plug and gasket to
allow the gear oil to drain completely.
NOTICE: Check the used gear oil after
it has been drained. If the gear oil is
milky or contains water or a large
amount of metal particles, the gear
case may be damaged. Have a
Yamaha dealer check and repair the
outboard motor.
[ECM00714]
TIP:
For disposal of used gear oil, consult your
Yamaha dealer.
VF200LA, VF225LA, VF250LA
1. Cooling water inlet cover
2. Bolt
1. Cooling water inlet cover
2. Bolt
1. Gear oil drain screw
1
2
ZMU06957
1
1
2
ZMU07189
1
2
ZMU06993
2. Gasket
1. Gear oil drain screw
2. Gasket
1. Oil level plug
2. Gasket
1
2
ZMU07190
12
ZMU06994
6CB-9-3B-1E0.book 93 ページ ２０１７年１１月１６日 木曜日 午後５時２９分
©2019 Yamaha Motor Corporation, U.S.A.