Yamaha VINO YJ50RR User Manual

3-10
EAU00262
Helmet holder
The helmet holder is located under
the seat.
To secure a helmet to the helmet
holder
1. Open the seat. (See page 3-9 for
opening procedures.)
2. Attach the helmet to the helmet
holder, and then securely close
the seat.
INSTRUMENT AND CONTROL FUNCTIONS
3
1
1. Helmet holder
EAU03450
Storage compartment
There is a storage compartment
under the seat. (See page 3-9 for
seat opening and closing proce-
dures.)
EWA00005
w
8 Do not exceed the load limit of
5 kg (11 lb) for the storage
compartment.
8 Do not exceed the maximum
load of 75 kg (165 lb) for the
vehicle.
1
1. Storage compartment
EW000030
w
Never ride with a helmet attached
to the helmet holder, since the hel-
met may hit objects, causing loss
of control and possibly an acci-
dent.
To release the helmet from the hel-
met holder
Open the seat, remove the helmet
from the helmet holder, and then
close the seat.
5LY-9-13 (US) 4/23/02 4:16 PM Page 28

Yamaha VINO YJ50RR Specifications

General

Ignition	CDI
Front Suspension	Telescopic fork
Rear Suspension	Unit swing
Front Brake	Drum
Rear Brake	Drum
Bore x Stroke	40.0mm x 39.2mm
Starting System	Electric/kick
Transmission	Automatic
Final Drive	Belt
Front Tire	3.00-10
Rear Tire	3.00-10