EasyManuals Logo

Yamaha XLT800 WaveRunner 2003 User Manual

Yamaha XLT800 WaveRunner 2003
140 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #101 background imageLoading...
Page #101 background image
4-6
E
N
O
TE:
@
The condition of the battery can be known
by checking the specific gravity of the elec-
trolyte. However, you can also know the con-
dition of the battery by measuring the
voltage at both battery terminals. Charge
the battery if the voltage is less than
12 volts.
It is recommended to have a Yamaha dealer
check the specific gravity and to charge the
battery. If you maintain the battery yourself,
be sure to read and follow the instructions
provided with the battery tester and charger
you use.
@
EJU01169
Cleaning the watercraft
Clean the watercraft before storing it for a
long period.
1. Wash down the hull, handlebars, and
drive unit with fresh water.
2. Rinse the engine and bilge area with
fresh water. Drain off all water and wipe
up remaining moisture with clean, dry
rags.
3. Spray the engines exterior with Yamaha
Silicone Protectant and Lubricant.
4. Wax the hull with a non-abrasive wax
such as Yamaha Silicone Wax.
5. Wipe all vinyl and rubber components,
such as the seat and engine compart-
ment seals, with a vinyl protectant such
as Yamaha Protectant.
Specific gravity (for reference):
1.28 at 20 °C (68 °F)
UF1F11.book Page 6 Monday, June 10, 2002 11:54 AM

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yamaha XLT800 WaveRunner 2003 and is the answer not in the manual?

Yamaha XLT800 WaveRunner 2003 Specifications

General IconGeneral
ManufacturerYamaha
ModelXLT800 WaveRunner
Year2003
CategoryBoat
Engine Type2-cylinder, 2-stroke
Displacement784 cc
Fuel TypeGasoline
Bore x Stroke82 x 74 mm
Starting SystemElectric
Hull MaterialFiberglass
Seating Capacity3 persons
Fuel DeliveryCarburetor

Related product manuals