Need help?Do you have a question about the Yamaha XSR MTM690 and is the answer not in the manual?
General| Bore x Stroke | 80.0mm x 68.6mm |
|---|---|
| Compression Ratio | 11.5:1 |
| Fuel System | Fuel injection |
| Final Drive | Chain |
| Ignition | TCI |
| Transmission | 6-speed |
| Front Brake | Dual 298mm hydraulic disc |
| Rear Brake | 245mm hydraulic disc |
| Front Tire | 120/70ZR17 |
| Engine | 689cc liquid-cooled, DOHC, inline twin-cylinder; 4 valves per cylinder |
Discusses owner's responsibilities for safe operation and proper riding techniques.
Details essential protective gear like helmets, jackets, boots, and gloves for rider safety.
Warns about deadly carbon monoxide from exhaust, its symptoms, and prevention measures.
Guides on choosing aftermarket parts and safe motorcycle transport procedures.
Identifies and labels key components visible from the left and right sides of the motorcycle.
Illustrates and labels controls and instruments on handlebars and dashboard.
Explains the anti-theft immobilizer system, its keys, indicator light, and precautions.
Details the functions of the main switch and steering lock positions (ON, OFF, LOCK, P).
Explains the meaning and function of various indicator lights and warning lights on the instrument panel.
Describes the functions of the speedometer, tachometer, and fuel meter displays.
Explains eco indicator, gear display, and fuel consumption readouts.
Identifies handlebar switches and explains brightness control for the meter unit.
Details operation of brake lever, pedal, clutch lever, and related switches.
Explains the Anti-lock Brake System, its operation, and potential sensations during activation.
Details how to open/close the fuel cap and critical refueling safety precautions.
Explains how to remove/install the seat and use the helmet holding cable.
Explains sidestand function and the ignition circuit cut-off system.
Lists essential checks for fuel, oil, coolant, and brake systems before riding.
Covers checks for clutch, throttle, drive chain, and tires.
Details checks for chassis fasteners, switches, pedals, and levers.
Explains engine starting procedures and techniques for smooth gear shifting.
Details smooth acceleration, deceleration, and engine break-in procedures.
Lists recommended shift points and tips for reducing fuel consumption.
Provides instructions for properly parking the motorcycle, including safety precautions.
Describes the owner's tool kit and the emission control system maintenance chart.
Provides charts for general maintenance, lubrication, and service intervals.
Details checking spark plugs and servicing engine oil and filter.
Explains how to check and change the engine coolant.
Covers replacing the air filter element and adjusting throttle grip free play.
Details tire pressure, inspection, and wheel maintenance.
Covers brake lever checks, fluid levels, pad wear, and fluid changes.
Details drive chain slack adjustment and cleaning/lubrication procedures.
Explains lubrication for levers, pedals, and control cables.
Covers lubrication and checks for suspension, steering, and wheel bearings.
Provides guidance on battery charging, storage, and fuse replacement.
Details replacement procedures for headlight and auxiliary lights.
Offers charts for diagnosing starting problems, poor performance, and engine overheating.
Provides detailed steps for cleaning the motorcycle, including special care for matte parts.
Offers instructions for short-term and long-term storage of the motorcycle.
Lists motorcycle dimensions, engine type, and oil recommendations.
Details fuel capacity, spark plug type, and transmission gear ratios.
Provides specifications for chassis, brakes, suspension, and wheels.
Lists specifications for electrical system components like battery, headlight, and lights.
Explains the importance of recording VIN, engine serial, and model label information.
Indicates the location of the diagnostic connector for potential accessory installation guidance.
To Next Page
