Yamaha XSR900 2021 - Replacing a Turn Signal Light Bulb

Periodic maintenance and adjustment
7-33
1
2
3
4
5
6
7
8
9
10
11
12
sition, and then secure it with the
bulb holder.
5. Install the headlight bulb cover,
and then connect the coupler.
6. Install the headlight unit by install-
ing the bolts.
7. Have a Yamaha dealer adjust the
headlight beam if necessary.
EAU70540
Brake/tail light
This model is equipped with an
LED-type brake/tail light.
If the brake/tail light does not come on,
have a Yamaha dealer check it.
EAU24205
Replacing a turn signal light
bulb
1. Remove the turn signal light lens
by removing the screw.
2. Remove the burnt-out bulb by
pushing it in and turning it counter-
clockwise.
1. Turn signal light lens
2. Screw
1
2
BAE-28199-12.book 33 ページ ２０２０年７月２８日 火曜日 午前１０時８分