Need help?Do you have a question about the Yamaha XT250 2020 and is the answer not in the manual?
General| Bore x Stroke | 74.0mm x 58.0mm |
|---|---|
| Compression Ratio | 9.5:1 |
| Fuel Delivery | Fuel Injection |
| Ignition | TCI: Transistor Controlled Ignition |
| Transmission | 5-speed; multiplate wet clutch |
| Final Drive | Chain |
| Suspension Rear | Single shock; 7.1-in travel |
| Tires Front | 2.75-21 |
| Tires Rear | 120/80-18 |
| Seat Height | 31.9 in |
| Wheelbase | 53.5 in |
| Ground Clearance | 11.2 in |
| Fuel Capacity | 2.6 gal |
| Wet Weight | 291 lb |
| Engine Type | 249cc air-cooled SOHC 4-stroke; 2 valves |
| Suspension Front | Telescopic fork; 8.9-in travel |
| Brakes Front | Single 245mm disc |
| Brakes Rear | Single 203mm disc |
Emphasizes owner responsibility, training, safe riding techniques, and accident prevention.
Recommends protective apparel and outlines precautions against hazards like CO poisoning.
Ensuring adequate fuel levels and checking engine oil for proper operation before riding.
Verifying front and rear brake operation, fluid levels, and pad wear for safe braking.
Inspecting clutch operation, throttle grip, and drive chain condition for smooth performance.
Ensuring tires have proper pressure and condition, and checking wheels for damage.
Guidelines for the initial break-in period to ensure engine longevity and performance.
Schedules for emission control system and general maintenance, lubrication, and replacement intervals.
Procedures for spark plug maintenance and engine oil/filter replacement.
Guidance on checking tire air pressure, tread depth, and overall tire condition.
Procedures for adjusting levers, checking fluid, and inspecting brake pads and light switches.
Instructions for drive chain slack, cleaning, lubricating, and lubricating control cables.
Guidance on diagnosing and resolving common operational problems with the fuel, battery, and ignition systems.
To Next Page
