EasyManua.ls Logo

Yamaha XT250 2008 User Manual

Yamaha XT250 2008
100 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
3C5-28199-11
XT250YC
OWNER’S MANUAL
Read this manual carefully before operating this vehicle.
LIT-11626-22-25
XT250Y

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Yamaha XT250 2008 and is the answer not in the manual?

Yamaha XT250 2008 Specifications

General IconGeneral
Compression Ratio9.5:1
IgnitionCDI
Transmission5-speed
Final DriveChain
Front Suspension35mm telescopic fork; 8.9-in travel
Rear SuspensionSingle shock; 7.1-in travel
Front BrakeSingle disc, 245mm
Front Tire2.75-21
Rear Tire120/80-18
Wheelbase53.5 in
Seat Height31.9 in
Fuel Capacity2.4 gal
Curb Weight291 lb
Ground Clearance11.2 in
Bore x Stroke74.0mm x 58.0mm
Fuel SystemCarburetor
Rear BrakeDrum
Length84.6 inches
Engine Type249cc, air-cooled, 4-stroke single; SOHC, 2 valves

Summary

OWNER'S MANUAL

INTRODUCTION

Overview of the motorcycle model, its design, and manual purpose.

SAFETY INFORMATION

Be a Responsible Owner

Emphasizes owner's duties, safe operation, and protective apparel.

Avoid Carbon Monoxide Poisoning

Warns about dangers of engine exhaust in enclosed areas.

DESCRIPTION

Controls and instruments

Locates and names various controls and instruments on the handlebar and dash.

INSTRUMENT AND CONTROL FUNCTIONS

Main switch/steering lock

Explains the operation of the ignition and steering lock.

Clutch lever

Describes the operation and adjustment of the clutch lever.

Shift pedal

Explains the operation of the gear shift pedal.

Brake lever

Describes the operation of the front brake lever.

Brake pedal

Describes the operation of the rear brake pedal.

Fuel

Provides information on fuel type, capacity, and safe refueling practices.

Ignition circuit cut-off system

Describes the safety interlock system involving sidestand, clutch, and neutral switches.

FOR YOUR SAFETY – PRE-OPERATION CHECKS

Pre-operation check list

A checklist of items to inspect before operating the vehicle.

OPERATION AND IMPORTANT RIDING POINTS

Starting and warming up a cold engine

Step-by-step guide for starting a cold engine safely.

Shifting

Explains how to shift gears and shows gear position layout.

To start out and accelerate

Guide on how to smoothly start moving and accelerate the motorcycle.

To decelerate

Instructions on how to slow down and stop the motorcycle.

PERIODIC MAINTENANCE AND ADJUSTMENT

General maintenance and lubrication chart

Comprehensive schedule for regular maintenance and lubrication tasks.

Engine oil and oil filter element

How to check, change engine oil, and replace the oil filter element.

Tires

Information on tire pressure, inspection, and types.

Adjusting the clutch lever free play

Steps to adjust the free play in the clutch lever.

Checking the front and rear brake pads

How to inspect brake pads for wear using indicator grooves.

Checking the brake fluid level

Procedures and precautions for checking brake fluid levels.

Cleaning and lubricating the drive chain

Instructions for cleaning and lubricating the drive chain.

Troubleshooting

General advice on diagnosing and resolving common motorcycle issues.

Troubleshooting chart

A flowchart to help diagnose starting and running problems.

MOTORCYCLE CARE AND STORAGE

SPECIFICATIONS

CONSUMER INFORMATION

YAMAHA MOTOR CORPORATION, U.S.A. STREET AND ENDURO MOTORCYCLE LIMITED WARRANTY

Details the terms, conditions, and exclusions of the limited warranty.

Related product manuals