Yamaha XT250 2008 User Manual

PERIODIC MAINTENANCE AND ADJUSTMENT
7-27
2
3
4
5
6
7
8
9
may contain substances that
could damage the O-rings. [ECA11111]
EAU23093
Checking and lubricating the
cables
The operation of all control cables and
the condition of the cables should be
checked before each ride, and the ca-
bles and cable ends should be lubricat-
ed if necessary. If a cable is damaged
or does not move smoothly, have a
Yamaha dealer check or replace it.
WARNING! Damage to the outer
housing of cables may result in in-
ternal rusting and cause interfer-
ence with cable movement. Replace
damaged cables as soon as possi-
ble to prevent unsafe condi-
tions. [EWA10711]
EAU23111
Checking and lubricating the
throttle grip and cable
The operation of the throttle grip should
be checked before each ride. In addi-
tion, the cable should be lubricated at
the intervals specified in the periodic
maintenance chart.
Recommended lubricant:
Yamaha Chain and Cable Lube or
engine oil

Yamaha XT250 2008 Specifications

General

Compression Ratio	9.5:1
Ignition	CDI
Transmission	5-speed
Final Drive	Chain
Front Suspension	35mm telescopic fork; 8.9-in travel
Rear Suspension	Single shock; 7.1-in travel
Front Brake	Single disc, 245mm
Front Tire	2.75-21
Rear Tire	120/80-18
Wheelbase	53.5 in
Seat Height	31.9 in
Fuel Capacity	2.4 gal
Curb Weight	291 lb
Ground Clearance	11.2 in
Bore x Stroke	74.0mm x 58.0mm
Fuel System	Carburetor
Rear Brake	Drum
Length	84.6 inches
Engine Type	249cc, air-cooled, 4-stroke single; SOHC, 2 valves