Need help?Do you have a question about the Yamaha R6 2008 and is the answer not in the manual?
General| Compression Ratio | 13.1:1 |
|---|---|
| Fuel System | Fuel injection with YCC-T and YCC-I |
| Final Drive | Chain |
| Front Brakes | Dual 310mm floating discs; radial-mount 4-piston calipers |
| Rear Brakes | 220mm disc; single-piston caliper |
| Front Tire | 120/70-ZR17 |
| Rear Tire | 180/55-ZR17 |
| Seat Height | 33.5 in |
| Wet Weight | 417 lb |
| Bore x Stroke | 67.0 mm x 42.5 mm |
| Ignition | TCI (Transistor Controlled Ignition) |
| Transmission | 6-speed |
| Front Suspension | 41mm inverted telescopic fork; 4.7-in travel |
| Rear Suspension | 4.7-in travel |
| Wheelbase | 54.3 in |
| Fuel Capacity | 4.6 gal |
| Engine Type | 599cc, liquid-cooled, 4-stroke, DOHC, 16-valve, inline four-cylinder |
Indicates potential for severe injury or death.
Inspecting friction and clutch plates for wear/damage.
Guidance on preparation, parts, and seals.
Explanation of the electronic fuel injection system's function.
How fuel is injected and controlled by ECU.
How YCC-T controls throttle valves and its advantages.
Benefits like increased power and driveability.
Enhanced engine power characteristics through intake length control.
How the vehicle indicates and displays error codes.
Steps for cleaning and preparing before disassembly.
Importance of replacing seals and O-rings during overhaul.
Guidelines for installing bearings and oil seals correctly.
Correct positioning and replacement of circlips.
To Next Page