Need help?Do you have a question about the Yamaha 2010 YZF-R6 and is the answer not in the manual?
General| Bore x Stroke | 67.0mm x 42.5mm |
|---|---|
| Compression Ratio | 13.1:1 |
| Fuel Delivery | Fuel Injection with YCC-T and YCC-I |
| Ignition | TCI: Transistor Controlled Ignition |
| Final Drive | Chain |
| Rear Brakes | 220mm disc; single-piston caliper |
| Front Tire | 120/70-ZR17 |
| Rear Tire | 180/55-ZR17 |
| Length | 80.3 in |
| Width | 27.8 in |
| Height | 43.1 in |
| Seat Height | 33.5 in |
| Wheelbase | 54.1 in |
| Fuel Capacity | 4.5 gal |
| Wet Weight | 417 lb |
| Engine Type | Liquid-cooled, inline 4-cylinder, DOHC, 16 valves |
| Transmission | 6-speed |
| Front Suspension | 41 mm inverted fork; 4.7-in travel |
| Rear Suspension | Single shock; 4.7-in travel |
| Front Brakes | Dual 310mm disc; radial-mount 4-piston calipers |
Parts are not covered by warranty.
Kit parts intended for racing purposes only.
Explanation of symbols used in parts list.
Details on pistons, rods, crankshaft, cams, springs, oil pump.
Details on spark plugs and head gaskets.
Components for air intake and throttle control.
Parts for clutch, transmission gears, and ratios.
AIS plugs, wire harness, ECU, and interface cable.
Engine, chassis, and oil catch tank protectors.
Details and adjustments for front and rear suspension.
Steering damper, seat cushion, spare wheels, throttles.
Torque specifications for engine components.
Step-by-step guide for tightening cylinder head bolts.
Procedure for tightening crankcase bolts.
To Next Page