– 3 –
2. Spark Plug Set (5FL-R045Q-70, 13S-R373A-70)
TIP
Since these spark plugs have a copper gasket, caution is needed during installation on
the following points.
1. The tightening torque is 12 – 15 N•m (1.2 – 1.5 kgf•m).
2. When not checking the torque, tighten by rotating through 30° after manual
tightening in the case of new plugs. When reusing plugs, tighten by rotating through
15°.
Parts List
Semi surface discharge Type (5FL-R045Q-70)
No. PART No. PART NAME Q'TY REMARKS
1 5FL-1119C-70 PLUG, SPARK 4 NGK R0045Q-10
Parts List
Angled ground strap Type (13S-R373A-70)
No. PART No. PART NAME Q'TY REMARKS
1 13S-1119C-70 PLUG, SPARK 4 NGK R0373A-10
To Next Page
Loading...
