Yamaha 2010 YZF-R6 User Manual

– 36 –
23. Cable Interface (13S-8533A-70)
• This cable connects the kit wire harness to the personal computer on which YEC FI
Matching System (YMS) is installed.
• Please see the YMS manual for instructions on how to use YMS.
• When connecting the cable to the PC for the first time, it is necessary to install the USB
driver. Refer to the USB Driver Installation Manual provided on the 8 cm CD for details on
how to install the USB driver.
• The product vendor ID and product ID are provided by the Hamamatsu TOA Electronics,
Inc.
Vendor ID: 6837
Product ID: 9001
Parts List
No. PART No. PART NAME Q'TY REMARKS
1 13S-8533A-70 CABLE, INTERFACE 1 USB
2 13S-N81CD-70 8cm CD 1 USB driver

Yamaha 2010 YZF-R6 Specifications

General

Bore x Stroke	67.0mm x 42.5mm
Compression Ratio	13.1:1
Fuel Delivery	Fuel Injection with YCC-T and YCC-I
Ignition	TCI: Transistor Controlled Ignition
Final Drive	Chain
Rear Brakes	220mm disc; single-piston caliper
Front Tire	120/70-ZR17
Rear Tire	180/55-ZR17
Length	80.3 in
Width	27.8 in
Height	43.1 in
Seat Height	33.5 in
Wheelbase	54.1 in
Fuel Capacity	4.5 gal
Wet Weight	417 lb
Engine Type	Liquid-cooled, inline 4-cylinder, DOHC, 16 valves
Transmission	6-speed
Front Suspension	41 mm inverted fork; 4.7-in travel
Rear Suspension	Single shock; 4.7-in travel
Front Brakes	Dual 310mm disc; radial-mount 4-piston calipers