Need help?Do you have a question about the Yamaha YZF-R6(V) 2006 and is the answer not in the manual?
General| Engine Type | Liquid-cooled, 4-stroke, DOHC, forward-inclined parallel 4-cylinder |
|---|---|
| Displacement | 599 cc |
| Bore x Stroke | 67.0 x 42.5 mm |
| Compression Ratio | 12.8 : 1 |
| Fuel System | Fuel injection |
| Lubrication system | Wet sump |
| Final Drive | Chain |
| Rear Suspension | Swingarm, (link suspension) |
| Front Tyre | 120/70 ZR17M/C (58W) |
| Rear Tyre | 180/55 ZR17M/C (73W) |
| Overall Length | 2, 040 mm |
| Overall Height | 1, 100 mm |
| Seat Height | 850 mm |
| Minimum Ground Clearance | 130 mm |
| Oil capacity | 3.4 litres |
| Ignition | TCI |
| Clutch Type | Wet, multiple-disc |
| Transmission | 6-speed |
| Frame type | Aluminium Deltabox |
| Front Brake | Dual 310 mm discs |
| Rear Brake | 220 mm disc |
| Fuel Capacity | 17 liters |
Detailed technical data for the engine components.
General and specific torque values for fasteners.
Specifies lubrication points for engine and chassis.
Schedule of recommended checks and maintenance jobs.
Procedure for measuring and adjusting valve clearance.
Procedure for synchronizing throttle bodies for optimal performance.
Procedure for measuring engine compression pressure.
Procedure for checking the engine oil level.
Procedure for draining and refilling engine oil.
Procedure for measuring engine oil pressure.
Procedure for replacing the air filter element.
Procedure for checking the coolant level.
Procedure for draining and refilling the cooling system.
Procedure for checking front and rear brake fluid levels.
Procedure for bleeding the hydraulic brake system.
Procedure for checking and adjusting drive chain slack.
Procedure for checking and adjusting steering head.
Procedure for adjusting front fork leg spring preload and damping.
Procedure for checking and replacing fuses.
Procedure for checking battery charge and charging methods.
Troubleshooting steps for engine starting failures.
Troubleshooting steps for clutch issues like slipping or dragging.
Troubleshooting steps for engine overheating.
Troubleshooting steps for poor braking performance.
Troubleshooting steps for lighting and signaling system issues.
To Next Page