– 27 –
18. Drive Sprocket
These parts are for 520 chains (STD=525 chain).
Use the nuts for the kit to mount the drive sprocket.
These sprockets are manufactured to be compatible with new and old models.
NOTICE
Take care not to install the sprocket in the wrong direction. If it is installed in the wrong
direction, it will cause the misalignment of the drive and rear sprockets, leading to the
loss of power.
Parts List
No. PART No. PART NAME Q'TY REMARKS
1 2C0-17460-74 SPROCKET, DRIVE 1 14T
2 2C0-17460-75 SPROCKET, DRIVE 1 15T
3 2C0-17460-76 SPROCKET, DRIVE 1 16T
GROOVE
MACHINING
STAMP OF THE NUMBER OF
TEETH ON BOTH SIDES
2CO ('06 and after YZF-R6)
Install with the grooved surface
facing outside of the chassis.
5SL ('05 and previous YZF-R6)
Install with the grooved surface
facing inside of the chassis.
To Next Page
Loading...
