Need help?Do you have a question about the Yamaha XT250P and is the answer not in the manual?
General| Displacement | 249 cc |
|---|---|
| Compression Ratio | 9.5:1 |
| Final Drive | Chain |
| Rear Tire | 120/80-18 |
| Fuel Capacity | 2.6 gallons |
| Wet Weight | 291 lbs |
| Engine Type | Air-cooled, SOHC, 4-stroke |
| Bore x Stroke | 74.0 mm x 58.0 mm |
| Fuel System | Fuel injection |
| Transmission | 5-speed |
| Front Suspension | Telescopic fork |
| Rear Suspension | 7.1-in travel |
| Seat Height | 31.9 inches |
| Wheelbase | 54.3 inches |
| Ignition | TCI (Transistor Controlled Ignition) |
Details specific labels for emission hose routing and tire information.
Outlines owner duties, safe riding practices, and vehicle checks.
Emphasizes protective apparel and warns against carbon monoxide exposure.
Guidelines for loading cargo, using genuine accessories, and aftermarket parts.
Provides instructions for safely transporting the motorcycle in another vehicle.
Identifies key components on the left side of the vehicle.
Identifies key components on the right side of the vehicle.
Shows and lists the various controls and instruments on the handlebars.
Explains the functions of the ignition switch and steering lock positions.
Describes the function and meaning of various dashboard indicator lights.
Details the features and operation of the digital display unit, including speedometer and tripmeter modes.
Covers clock setting, self-diagnosis, and left/right handlebar switch functions.
Explains the operation of the clutch lever, shift pedal, brake lever, and brake pedal.
Details fuel tank cap usage, refueling, and gasohol information.
Instructions for seat/helmet holder use and shock absorber preload adjustment.
Explains sidestand operation and the ignition circuit cut-off system's safety function.
Advises on proper engine break-in for the first 1600 km to ensure longevity.
Steps and precautions for starting the motorcycle's engine.
Explains the shifting mechanism and proper gear change techniques.
Provides recommended speeds for upshifting and downshifting.
Guidelines for safely parking the motorcycle, considering heat and ground conditions.
Lists the tools provided and their intended use for maintenance.
Details maintenance intervals for emission control system components.
Outlines routine checks, adjustments, and lubrication for various parts.
Step-by-step guide on how to detach and reattach body panels for maintenance.
Instructions on inspecting the spark plug to assess engine condition.
Guidance on checking engine oil level, changing oil, and replacing the filter.
Steps for replacing the air filter element and cleaning the check hose.
Procedures for cleaning the spark arrester to maintain exhaust system performance.
How to check engine idling speed and adjust valve clearance.
Covers tire pressure checks, tread depth, and general tire condition.
Advises on checking spokes for looseness and wheel balance.
Details how to adjust the clutch lever's free play for proper engagement.
Guides on adjusting the brake lever's free play for optimal responsiveness.
Explains how to check and adjust the rear brake light switch timing.
How to inspect front and rear brake pads for wear using indicator grooves.
Instructions for checking brake fluid level and recommended change intervals.
How to check and adjust the drive chain slack for proper operation.
Procedures for cleaning and lubricating the drive chain to prevent wear.
How to check control cable operation and lubricate them if necessary.
Guidance on checking throttle grip operation and lubricating the cable.
How to check and lubricate the pivots of the brake and shift pedals.
Instructions for checking lever operation and lubricating pivots.
How to check sidestand operation and lubricate its pivot.
Recommends professional lubrication of rear suspension and swingarm pivots.
How to check the front fork for damage, oil leaks, and smooth operation.
How to check steering bearings for looseness and wheel bearings for play.
Information on battery type, checks, charging, and storage precautions.
Step-by-step guide for replacing blown fuses with correct amperage.
Instructions for replacing headlight, brake/tail, and turn signal bulbs.
Precautions for supporting the motorcycle and procedures for wheel removal/installation.
Explains how to diagnose common operational problems using a chart.
Advises on special care for matte finished parts to avoid damage.
Guidelines for washing, rinsing, and drying the motorcycle properly.
Recommendations for storing the vehicle to prevent damage and corrosion.
Explains where to find and record VIN, engine serial, model, and emission control labels.
Instructions on reporting safety defects and information on noise control regulations.
Log for service records and details of the limited warranty, customer responsibilities, and FAQs.
Information about the optional extended service plan for continued coverage.
Highlights benefits of genuine parts, accessories, Yamalube products, and service manuals.
To Next Page
