Need help?Do you have a question about the Yamaha XT250X and is the answer not in the manual?
General| Engine Type | Air-cooled, 4-stroke, SOHC, 2-valve |
|---|---|
| Engine Displacement | 249cc |
| Compression Ratio | 9.5 : 1 |
| Fuel System | Fuel injection |
| Ignition | TCI |
| Transmission | 5-speed |
| Final Drive | Chain |
| Front Suspension | Telescopic fork |
| Front Brake | Single disc |
| Rear Brake | Single disc |
| Height | 1, 160 mm (45.7 in) |
| Ground Clearance | 285mm (11.2 inches) |
Detailed technical data for the engine components and performance.
Technical data related to the vehicle's frame, suspension, wheels, and brakes.
Technical data for the vehicle's electrical system components and performance.
Specifies torque values for various fasteners during assembly and maintenance.
Procedures for checking and adjusting engine-related components and systems.
Procedures for checking and adjusting chassis components, including brakes, suspension, and wheels.
Procedures for checking and adjusting electrical components, including battery, lights, and signals.
Procedures for removing, checking, and installing the front wheel assembly.
Procedures for removing, checking, and installing the rear wheel assembly.
Procedures for servicing the front brake system, including disc, pads, caliper, and master cylinder.
Procedures for servicing the rear brake system, including disc, pads, caliper, and master cylinder.
Procedures for servicing the front suspension forks, including removal and disassembly.
Procedures for checking and adjusting the steering head bearings and components.
Procedures for servicing the rear shock absorber and related linkage.
Steps and procedures for removing the engine from the vehicle frame.
Procedures for removing, checking, and installing the cylinder head and its components.
Procedures for removing, checking, and installing the camshaft and rocker arm assembly.
Procedures for removing, checking, and installing valves, springs, and related parts.
Procedures for removing, checking, and installing the cylinder, piston, and rings.
To Next Page
