Chassis
Frame type Semi double cradle
Caster angle 26.42 °
Trail 106.0 mm (4.17 in)
Front wheel
Wheel type Spoke wheel
Rim size 21x1.60
Rim material Aluminum
Wheel travel 225.0 mm (8.86 in)
Radial wheel runout limit 2.0 mm (0.08 in)
Lateral wheel runout limit 2.0 mm (0.08 in)
Wheel axle bending limit 0.25 mm (0.01 in)
Rear wheel
Wheel type Spoke wheel
Rim size 18M/C x MT2.15
Rim material Aluminum
Wheel travel 180.0 mm (7.09 in)
Radial wheel runout limit 2.0 mm (0.08 in)
Lateral wheel runout limit 2.0 mm (0.08 in)
Wheel axle bending limit 0.25 mm (0.01 in)
Front tire
Type With tube
Size 2.75-21 45P
Manufacturer/model CHENG SHIN/C-6006
Manufacturer/model DUNLOP/D605F
Wear limit (front) 0.8 mm (0.03 in)
Rear tire
Type With tube
Size 120/80-18M/C 62P
Manufacturer/model CHENG SHIN/C-6006
Manufacturer/model DUNLOP/D605
Wear limit (rear) 0.8 mm (0.03 in)
Tire air pressure (measured on cold tires)
Loading condition 0–90 kg (0–198 lb)
Front 125 kPa (18 psi) (1.25 kgf/cm
2
)
Rear 150 kPa (22 psi) (1.50 kgf/cm
2
)
Loading condition 90 kg–Maximum load
Front 150 kPa (22 psi) (1.50 kgf/cm
2
)
Rear 175 kPa (25 psi) (1.75 kgf/cm
2
)
Front brake
Type Single disc brake
Operation Right hand operation
Front brake lever free play 2.0–5.0 mm (0.08–0.20 in)
Front disc brake
Disc outside diameter × thickness 245.0 × 3.5 mm (9.65 × 0.14 in)
Brake disc thickness limit 3.0 mm (0.12 in)
To Next Page
Loading...
